Connecting Dvd-Vcr To The Tv Using The Rca Cable; Connecting Dvd-Vcr To A Satellite Receiver Or Other Equipment; Plug & Auto Set Up - Samsung DVD-V440 Instruction Manual

Hide thumbs Also See for DVD-V440:
Table of Contents

Advertisement

Connecting DVD-VCR to the
TV using the RCA Cable
You can connect your DVD-VCR to the television using
the RCA cable if the appropriate input is available on
the television. You thus:
Obtain better quality sound and pictures
Simplify the setting up procedure of your
DVD-VCR
Regardless of the type of connection chosen, you
must always connect the coaxial cable supplied.
Otherwise, no picture will be visible on the
screen when the DVD-VCR is switched off.
Make sure that both the television and the DVD-
VCR are switched off before connecting the
cables.
1
Connect the coaxial cable as indicated on page 7.
2
Connect one end of the RCA Audio/Video cable to
the Video output and Audio L, R output socket on
the rear of the DVD-VCR.
3
Plug the other end into the appropriate connector
on the television.
Aerial
Downloaded From Disc-Player.com Samsung Manuals
TV
3
2
RF coaxial cable
Connecting DVD-VCR to a Satellite
Receiver or Other Equipment
You can connect other audio and/or video equipment
to your DVD-VCR in different ways. The following
illustrations give a few examples of the connection
possibilities.
The RCA input/output connectors on the rear of
the DVD-VCR are used for equipment, such as
camcorders, VCRs or sound systems.
REAR OF THE
DVD-VCR
Plug & Auto Set up
Your DVD-VCR will automatically set itself up when it
is plugged into the mains for the first time. TV stations
will be stored in memory. The process takes a few
minutes. Your DVD-VCR will then be ready for use.
1
Connect the coaxial cable as indicated on page 7.
(Connecting Your DVD-VCR to the TV Using the
Coaxial Cable)
2
Plug the DVD-VCR into the mains.
Result: The Language Set menu is displayed.
3
Select the required language by pressing the
buttons.
4
Press OK to store the language selected.
Result: A message appears.
5
Press OK button.
6
Press OK to start the auto scanning.
The number of stations automatically stored by
theVCR depends on the number of stations that
it has found.
Camcorder
VCR
Sound system
or

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvd-v540Dvd-v340

Table of Contents