Using The Phonebook - Uniden XDECT 7015WP Series Owner's Manual

Delete Entry
Store Into Pb
Delete All
Using Call Waiting
If you get a Call Waiting call, the phone sounds a tone and displays
any CID information received for the waiting call.
For Australian Model:
Press
TaLK ( )/FLaSH
call. The first caller is put on hold, and you will hear the new caller
after a short pause. To return to the original caller, press
and then again.
2
For New Zealand Model:
Press
TaLK ( )/FLaSH
caller is put on hold, and you will hear the new caller after a short
pause. To return to the original caller, press
Note: You must subscribe to Call Waiting service for this feature to
operate. Not all features are available in all areas.

Using the Phonebook

Each handset can store up to 70 entries in its phonebook.
Open/close the phonebook
Scroll through the entries
Jump to entries that start
with a certain letter
Dial an entry
Erase this Caller ID number.
Add this number to this handset's phonebook. The phone
prompts you to enter the name, edit the phone number,
and choose a personal ring.
Erase this handset's CID list. (This does not affect the CID
lists saved on any other handsets.)
and then on the handset to accept the waiting
2
on the handset to accept the waiting call. The first
Press
Press
from A to Z or
Press the number key corresponding to the
letter you want to jump to.
1. Find the entry you want to dial.
2. Press
TaLK ( )/FLaSH
PHONEBOOK.
to scroll through the phonebook
DOWN
to scroll from Z to A.
UP
TaLK ( )/FLaSH
TaLK ( )/FLaSH
again.
or .
SPEaKEr
13