HP ProDesk 400 G1 Maintenance And Service Manual page 82
Hide thumbs
Also See for ProDesk 400 G1:
- Specification (59 pages) ,
- Maintenance and service manual (126 pages)
Table of Contents
Advertisement
4.
Slide the drive into the drive bay (1) and install the four 6-32 mounting screws (2) to secure the
drive in place.
NOTE:
HP has supplied four extra 6-32 mounting screws on the front of the chassis behind the
bezel. Refer to
Drives on page 59
for an illustration of the extra mounting screws location. When
replacing a hard drive, use the four 6-32 mounting screws that were removed from the old drive to
install the new one.
72
Chapter 5 Removal and replacement procedures: Microtower
Hide quick links:
Advertisement
Table of Contents
