Sff Specifications - HP ProDesk 400 G1 Maintenance And Service Manual

Standard Efficiency
High Efficiency
Rated Input Current
This system utilizes an active power factor corrected power supply. This allows the system to pass the CE mark requirements
1
for use in the countries of the European Union. The active power factor corrected power supply also has the added benefit of
not requiring an input voltage range select switch.

SFF specifications

Chassis (in the desktop position)
Height
Width
Depth
Approximate Weight
Weight Supported (maximum distributed load in desktop position)
Temperature Range
Operating
Nonoperating
NOTE:
Operating temperature is derated 1.0° C per 300 m (1000 ft) to 3000 m (10,000 ft) above sea level; no direct
sustained sunlight. Maximum rate of change is 10° C/Hr. The upper limit may be limited by the type and number of options
installed.
Relative Humidity (noncondensing)
Operating
Nonoperating (38.7°C max wet bulb)
Maximum Altitude (unpressurized)
Operating
Nonoperating
Power Supply
Operating Voltage Range
Rated Voltage Range
Rated Line Frequency
Operating Line Frequency
226 Appendix C Specifications
1
300W active PFC(230 VAC input only)
300W active PFC EStar 6
82/85/82% efficient at 20/50/100% load (230V)
4A
3.93 in
13.26 in
14.98 in
13.0 lb
77 lb
50° to 95°F
-22° to 140°F
10-90%
5-95%
10,000 ft
30,000 ft
90-264 VAC
100-240 VAC
50-60 Hz
47-63 Hz
100 mm
33.7 cm
380 mm
5.9 kg
35 kg
10° to 35°C
-30° to 60°C
10-90%
5-95%
3048 m
9144 m