HP ProDesk 400 G1 Maintenance And Service Manual page 62
Hide thumbs
Also See for ProDesk 400 G1:
- Specification (59 pages) ,
- Maintenance and service manual (126 pages)
Table of Contents
Advertisement
3.
Remove the screw that holds down the expansion card retention latch (1) then slide the latch up
(2) and pull it off the rear of the chassis (3).
4.
Locate the correct vacant expansion socket on the system board and the corresponding expansion
slot on the back of the computer chassis.
5.
Before installing an expansion card, remove the expansion slot cover or the existing expansion
card.
NOTE:
attached to the expansion card.
52
Chapter 5 Removal and replacement procedures: Microtower
Before removing an installed expansion card, disconnect any cables that may be
Hide quick links:
Advertisement
Table of Contents
