Packard Bell DOT S series User Manual page 93

3. Press the down key until F12 Boot Menu is selected, press F5 to
change this setting to Enabled.
4. Use the left or right arrow keys to select the Exit menu.
5. Select Save Changes and Exit and press Enter. Select OK to
confirm.
6. Your computer will restart.
3. During startup, press F12 to open the boot menu. The boot menu
allows you to select which device to start from, such as the hard
drive or an optical disc.
4. Use your arrow keys to select the line CDROM/DVD or USB HDD,
then press Enter. Windows installs from the recovery backup instead
of the normal startup process.
5. Follow the on-screen prompts to complete the recovery.
Recovery -
93