Completion Notice Function; Setting Up The Completion Notice - Panasonic DP-C354 Operating Instructions Manual

Setting up

Completion Notice Function

■ ■ ■ ■ ■ Setting up the Completion Notice
Ex: Copy Job
Basic Procedures:
1
Install the Job Status Utility located
on the Panasonic Document
Management System CD-ROM.
(See pages 8-12)
2
Confirm that the Panasonic Job
Status Utility icon
the task bar.
Panasonic Job Status Utility Icon
●
If the Job Status Utility icon
shown on the task bar, select "All
Programs" → → → → → "Panasonic" → → → → → "Job
Status Utility" → → → → → "Job Status Utility" → → → → →
to activate the Job Status Utility icon.
3
For PC Fax, and PC Print only
Setup the Completion Notice as
described in the column on the right.
For Copy, Fax, and Internet Fax only
Refer to "Setting up the Scanner
Configuration using the Communications
Utility". (See page 33)
Select your PC on the Touch Panel Display
of the machine, refer to the Completion
Notice of each relevant Operation
Instructions on the provided CD-ROM.
32
The Job Status Utility software will display the pop-up Completion Notice
on your PC screen when finishing the Print, PC Fax, Copy, and Fax jobs.
The information displayed in the Completion Notice vary according to the
type of job being performed.
Setting up for PC Fax, and PC Print:
1
is shown on
2
is not
Right-click the Panasonic Job
Status Utility icon on the task
bar, and select "Setup" from the
menu.
Panasonic Job Status Utility Icon
Choose the display condition for
the Setup window, and then click
"OK".
All : Always displays after each
transmission, or print job.
Error only : Displays only when an error
occurs.
None : Does not display.