Selecting The Picture Size Manually (For Tv/Av Input Mode) - Sharp AQUOS LC-32Z33H Operation Manual

Watching TV

Selecting the picture size manually (for TV/AV Input mode)

Manual Selection
You can select different picture sizes that account for
the kind of each picture.
Press WIDE.
1
• The WIDE MODE menu displays.
• The menu lists the wide mode options selectable
for the type of video signal currently received.
WIDE MODE
Normal
Zoom 14:9
Panorama
Full
Cinema 16:9
Cinema 14:9
Press WIDE or a / b while the WIDE MODE
2
menu displays on the screen.
• As you toggle down the options, each mode is
immediately refl ected on the TV.
Selected item
Normal For 4:3 "standard" pictures. A side bar appears on each side.
Zoom 14:9 For 14:9 letterbox pictures. A thin side bar appears on each side, and you may also see bars on the top and
bottom with some programmes.
Panorama In this mode the picture is progressively stretched toward each side of the screen.
Full For 16:9 squeeze pictures.
Cinema 16:9 For 16:9 letterbox pictures. Bars may appear on the top and bottom with some programmes.
For 14:9 letterbox pictures. Bars may appear on the top and bottom with some programmes.
Cinema 14:9
Underscan Display with an Underscan image only when receiving a 720p signal. Display with the High-Defi nition image
adjusted optimally. Noise may appear on the edge of the screen with some programmes.
Normal
Cinema 14:9
30
Zoom 14:9
Cinema 16:9
Auto Selection
If you set "WSS" and "4:3 Mode" in the Setup menu
on page 29, the optimum WIDE mode is automatically
chosen for every broadcast containing the WSS
information.
"WSS" menu
To enable Auto Selection, set "WSS" in the Setup
menu to "On". (See page 29.)
"4:3 Mode" menu
To set the type of the wide screen, select "Panorama"
or "Normal" in the 4:3 Mode menu. (See page 29.)
4:3 Mode set to "Panorama"
• If the broadcast signal contains no WSS information, Auto
Selection will not function even when the WSS option is
enabled.
Description
• Some picture sizes may not be
Panorama
Full
4:3 Mode set to "Normal"
displayable depending on the
input signal.