Input Resolution Settings; Selecting The Input Resolution - Sharp AQUOS LC-32Z33H Operation Manual

Connecting a PC

Input resolution settings

Selecting the input resolution

• Some input signals may have to be registered manually to
display properly.
• The pairs of input signals (resolutions) in the list below are
not distinguishable when received. In such case, you have
to set the correct signal manually. After setting once, it will
display when the same signal (resolution) is input again.
1024 x 768
• You can only select the "Input Signal" on the Setup menu
when receiving one of the 2 input signals listed above.
Press MENU and the MENU screen displays.
1
Press c/d to select "Option".
2
Press a / b to select "Fine Sync.", and then
3
press ENTER.
Press a / b to select "Input Signal", and then
4
press ENTER.
Press a / b to select the desired input signal
5
on the display, and then press ENTER.
Input Signal
Auto Sync.
H-Position
[ 90]
V-Position
[ 60]
Clock
[ 90]
Phase
[ 8]
Reset
42
1360 x 768
Select desired item
1024 x 768
1360 x 768
(Example)