Useful Adjustment Settings; Password Setting For Child Lock (For Tv/Dtv Input Mode) - Sharp LC-32BD6X Operation Manual

Useful adjustment settings

Password setting for child lock
(for TV/DTV input mode)
Allows you to use a password to protect certain settings
from being accidentally changed.
Setting a password
Register a 4-digit password number to use the Child
Lock function.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Setup".
3
Press a/b to select "Child Lock", and then
press ENTER.
4
If you already set the password, enter it here.
If not, enter the factory preset password
"1234".
– – – –
5
Press a/b to select "Change password",
and then press ENTER.
Change password
Reset
6
Enter the 4-digit number as a password using
0 – 9.
Change password
Reset
36
New Password – – – –
Reconfirm – – – –
New Password – – – –
Reconfirm – – – –
7
Enter the same 4-digit number as in step 6
to confirm.
• "The new password was registered." displays.
NOTE
• To view a locked channel (Lock setting in Programme
Setup "Manual Adjust" is set to "On"), you must enter a
password. (See page 22.) When you select a locked
channel, a password prompt message pops up. Press
ENTER to display the password input window.
Resetting the password
Allows you to reset your password.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Setup".
3
Press a/b to select "Child Lock", and then
press ENTER.
4
Enter the password.
– – – –
5
Press a/b to select "Reset", and then press
ENTER.
6
Press c/d to select "Yes", and then press
ENTER.
Change password
Reset
NOTE
• As a precautionary measure, make a note of your
password and keep it in a familiar place. If you lose or
forget your password, initialise the TV to return all
settings except for the TV channel settings to factory
preset values. (See page 53.)
• This function is only available for TV/DTV input mode.
• To relock a channel which has been temporarily unlocked
by inputting the correct password, turn power off and then
on again.
Yes No