Setting Channels To Your Preference; Auto Search; Manual Setting For Each Channel - Sharp AQUOS LC-32Z33H Operation Manual

Watching TV

Setting channels to your preference

You can run the auto search procedure again at any
time by accessing the Setup menu and Programme
Setup. Channels can be tuned automatically or
manually.

Auto search

You can also automatically search by performing
the procedure below. This is the same function as
programme auto search in auto installation.
Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
Press a / b to select "Programme Setup", and
3
then press ENTER.
If you have already set the password, enter it
here.
• See page 26 for setting a password.
Press a / b to select "Auto Search", and then
4
press ENTER.
Press a / b to select "Yes", and then press
5
ENTER.
Press a / b to select the desired sound
system, and then press ENTER.
"Search is completed." is displayed. Press
MENU to exit.

Manual setting for each channel

You can set some channel items manually. They are
Search, Fine (TV frequency), Colour System, Sound
System and Skip.
Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
Press a / b to select "Programme Setup", and
3
then press ENTER.
If you have already set the password, enter it
here.
• See page 26 for setting a password.
Press a / b to select "Manual Adjust", and
4
then press ENTER.
Press a / b to select "Yes", and then press
5
ENTER.
Programme Setup "Manual Adjust" menu
Please select channel to be edited.
01 SAT.1 02 PR07 03 KABEL
You can select one of the following settings.
1 Search (See page 20.)
2 Fine (See page 20.)
3 Colour system (See page 20.)
4 Sound system (See page 20.)
5 Skip (See page 21.)
19