Capacitor And Diode Bridge Removal And Replacement - Lincoln Electric POWER-ARC 4000 SVM103-A Service Manual

TROUBLESHOOTING & REPAIR
CAPACITOR AND/OR DIODE BRIDGE REMOVAL AND
Service and repair should be performed by only Lincoln Electric factory trained personnel.
Unauthorized repairs performed on this equipment may result in danger to the technician or
machine operator and will invalidate your factory warranty. For your safety and to avoid elec-
trical shock, please observe all safety notes and precautions detailed throughout this manu-
al.
If for any reason you do not understand the test procedures or are unable to perform the
test/repairs safely, contact the Lincoln Electric Service Department for electrical trou-
bleshooting assistance before you proceed.
(WELD).
DESCRIPTION
The following procedure will aid the technician in accessing and removing the capacitor and
diode bridge for maintenance or replacement of either component.
MATERIALS NEEDED
5/16" Nut driver
Jumper wire with alligator clips on each end for discharging the field capacitor
Slot head screw driver
Needle nose pliers
Wiring Diagram
REPLACEMENT
WARNING
Call 216-383-2531 or 1-800—833-9353
F-26
POWER-ARC 4000