Configuring Wan Settings - Motorola AP-51 Series Product Reference Manual

5-16 AP-51xx Access Point Product Reference Guide
2. Use the
Types defined for the LAN are allowed or denied for use by the access point.
3. To add an Ethernet type, click the
The Add Ethernet Type
time, for a list of up to 16 entries.
Packet types supported for the type filtering function include 16-bit DIX Ethernet types as
well as Motorola proprietary types. Select an Ethernet type from the drop down menu, or
enter the Ethernet type's hexadecimal value. See your System Administrator if unsure of the
implication of adding or omitting a type from the list for either LAN1 or LAN2.
4. To optionally delete a type filtering selection from the list, highlight the packet type and click
the Delete
5. Click Apply
screen. Navigating away from the screen without clicking Apply results in all changes to the
screens being lost.
6. Click Undo Changes
screen without saving your changes.
7. Click Logout
logout before the applet is closed.

5.2 Configuring WAN Settings

A Wide Area Network (WAN) is a widely dispersed telecommunications network. The access point
includes one WAN port. The access point WAN port has its own MAC address. In a corporate
environment, the WAN port might connect to a larger corporate network. For a small business, the
WAN port might connect to a DSL or cable modem to access the Internet.
all ethernet types, except
screen displays. Use this screen to add one type filter option at a
button.
to save any changes to the LAN1 or LAN2 Ethernet Type Filter Configuration
to securely exit the LAN1 or LAN2 Ethernet Type Filter Configuration
to securely exit the Access Point applet. A prompt displays confirming the
drop-down menu to designate whether the Ethernet
Add button.