Configuring Security Options; Resetting The Access Point Password - Motorola AP-51 Series Product Reference Manual

6-4 AP-51xx Access Point Product Reference Guide
CAUTION Restoring the access point's configuration back to default settings
!
5. Enter the previous password and the new admin password in the two fields provided. Click
the Apply
Once the admin password has been created/updated, the
If the access point has not had its System Settings (device name, location etc.) configured,
see Configuring System Settings on page
Once the password has been set, refer back to
determine which access point security feature to configure next.

6.2.1 Resetting the Access Point Password

The access point has a means of restoring its password to its default value. Doing so also reverts the
access point's security, radio and power management configuration to their default settings. Only an
installation professional should reset the access point's password and promptly define a new
restrictive password.
To contact Motorola Support in the event of a password reset requirement, go to
http://www.symbol.com/contactsupport.
changes the administrative password back to "motorola." If restoring
the configuration back to default settings, be sure you change the
administrative password accordingly.
button.
System Settings
4-2.
Configuring Security Options on page 6-2
screen displays.
to