Viewing Subnet Lease Statistics - Motorola AP-51 Series Product Reference Manual

7-12 AP-51xx Access Point Product Reference Guide
Designated Bridge
Designated Port
Designated Cost
4. Click the
confirming logout before the applet is closed.

7.2.2 Viewing Subnet Lease Statistics

When either (or both) of the access point's LAN interfaces are configured as a DHCP server, a client's
IP address lease assignment can now be monitored in respect to its lease period and expiration time.
To set the access point's LAN1 or LAN2 interfaces as a DHCP server, refer to
Interface on page
within the LAN1 or LAN2 interface
NOTE Manually (statically) assigned client IP addresses cannot be tracked for
To view access point LAN DHCP lease statistics:
1. Select Status and Statistics
There is only one root bridge within each mesh network. All other
bridges are designated bridges that look to the root bridge for
several mesh network timeout values. For information on root and
bridge designations, see
Networking Support on page
Each designated bridge must use a unique port. The value listed
represents the port used by each bridge listed within the table to
route traffic to other members of the mesh network.
Displays the unique distance between each access point MAC
address listed in the Designated Bridge column and the access
point MAC address listed in the Designated Root column.
Logout button to securely exit the Access Point applet. There will be a prompt
5-1. The available range of IP addresses that can be assigned is also defined from
expiration within the Subnet Lease Stats screen, only those assigned from
the access point DHCP server.
->
Setting the LAN Configuration for Mesh
9-6.
LAN Stats from the access point menu tree.
Configuring the LAN