Motorola AP-51 Series Product Reference Manual page 464

8-106 AP-51xx Access Point Product Reference Guide
AP51xx>admin(network.wireless.radio.802-11a)> set
Description:
Defines specific 802.11a radio parameters.
Syntax:
set placement
ch-mode
channel
acs-exception-list
antenna
power
rates
beacon
dtim
rts
range
qos
qbss-beacon
qbss-mode
Example:
admin(network.wireless.radio.802-11a)>
admin(network.wireless.radio.802-11a)>set placement indoor
admin(network.wireless.radio.802-11a)>set ch-mode user
admin(network.wireless.radio.802-11a)>set channel 1
admin(network.wireless.radio.802-11a)>set acs-exception-list 44 153 161
admin(network.wireless.radio.802-11a)>set antenna full
admin(network.wireless.radio.802-11a)>set power 4
admin(network.wireless.radio.802-11a)>set rates
admin(network.wireless.radio.802-11a)>set beacon 100
admin(network.wireless.radio.802-11a)>set dtim 1 10
admin(network.wireless.radio.802-11a)>set rts 2341
admin(network.wireless.radio.802-11a)>set qos cwmin 125
admin(network.wireless.radio.802-11a)>set qos cwmax 255
admin(network.wireless.radio.802-11a)>set qos aifsn 7
admin(network.wireless.radio.802-11a)>set qos txops 0
admin(network.wireless.radio.802-11a)>set qbss-beacon 110
admin(network.wireless.radio.802-11a)>set qbss-mode enable
For information on configuring the Radio 2 Configuration options available to the access point using the applet (GUI), see
Configuring the 802.11a or 802.11b/g Radio on page
Defines the access point radio placement as indoors or outdoors.
Determines how the radio channel is selected.
Defines the actual channel used by the radio.
Sets the radio antenna power.
Defines the radio antenna power transmit level.
Sets the supported radio transmit rates.
Sets the beacon interval used by the radio.
Defines the DTIM interval (by index) used by the radio.
Defines the RTS Threshold value for the radio.
Sets the radio's extended range (from 0-50 miles)
Defines the cwmin, cwmax, aifsn and txops levels for the QoS policy used for the radio.
Sets the QBSS Channel Util Beacon Interval in kilo-usec (10 - 200).
Enables/disables the QBSS load element.
5-56.