Station Names; Managing Key Assignments; Caller Id - Samsung DS 24D User Manual

STATION NAMES

You can assign an 11 character name to your keyset. This allows other dis-
play keyset users to call you using the directory dial feature.
To program a station name:
• Press TRANSFER and then dial 104.
• Enter the 11 character name using the procedure described in Alarm
Reminder Messages.
• Press TRANSFER to store the name.

MANAGING KEY ASSIGNMENTS

You can view your key assignments and add extenders to some of your pro-
grammable keys for easy one touch operation of frequently used features.
An extender is a number that makes an otherwise general key very specific.
Adding the digit "4" to a PAGE key defines this key for paging zone four.
Adding "225" to a different pickup key will define this key as pickup for
extension 225 only. The key must already be assigned by the technician.
• While on-hook, press TRANSFER and then dial 107.
• Use the VOLUME keys to scroll through all of your programmable keys
OR
Press the programmable key to which you want to add the extender.
• When you reach a key listed below, dial the corresponding extender.
• Press TRANSFER to store and exit programming.
KEY DESCRIPTION
BOSS . . . . . . .Boss/Secretary . . . . . . .1–4
DP . . . . . . . . . .Direct Pickup . . . . . . . .Extension or station group number
DS . . . . . . . . . .Direct Station . . . . . . . .Any extension number
FWRD . . . . . . .Call Forwarding . . . . . .0–5
GPIK . . . . . . . .Group Pick-Up . . . . . . .01–08
IG . . . . . . . . . . .In/Out of Group . . . . . .Any group you are part of 5XX
MMPG . . . . . . .Meet Me Page . . . . . . .0–5,
PAGE . . . . . . . .Page . . . . . . . . . . . . . . .0–5,
PSMG . . . . . . .Programmed Message 01–20
SG . . . . . . . . . .Station Group . . . . . . . .5XX
SPD . . . . . . . . .Speed Dialing . . . . . . .00–49, 500–799
DIR . . . . . . . . .Directory . . . . . . . . . . . .PERS (1), SYS (2) or STN (3)
VT . . . . . . . . . .Voice Mail Transfer . . .Voice Mail Group (5XX)
NOTE: Confirm that the cursor is placed correctly before you enter the ex-
tender.
EXTENDER
WHAT IS CALLER ID?
Caller ID is the name given to the telephone company-provided feature that
delivers the telephone number and sometimes the name of the person call-
ing your phone.
The Samsung iDCS 16 system supports Caller ID and in fact in the case
where the number only is delivered, the system can be programmed to
insert a name for a specific telephone number received. Up to a maximum
of 200 numbers can be programmed.
Caller ID is provided by telephone companies as a charged service on ana-
log PSTN lines. However, there are some circumstances where you will not
receive the information. The most common reasons for this are:
• The caller has requested the Telephone Company to stop their tele-
phone number being sent.
• The caller is calling from an area that cannot provide Caller ID, e.g. inter-
national calls.
• Callers are calling from a pay phone.
• The Caller ID information is corrupted when received from the telephone
company.
• The Telephone Company does not send the Caller ID.
• The Telephone Company may send the name MOBILE to the system.
SELECTING YOUR CALLER ID
DISPLAY
You can decide if you want to see the Caller ID name or Caller ID number in
the display. Regardless of which one is selected, you can press the NND
key to view the other pieces of Caller ID information. To select the type of
Caller ID information you wish to view first:
• With the handset on-hook, press TRANSFER and then dial 119.
• Dial 0 if you do not wish to view CID information, 1 to view the NUMBER
first or 2 to view the NAME first.
• Press TRANSFER to exit and store your selection.
37 38