Honda TRX450ER Owner's Manual page 165

Drive Chain
Adjustment
Refer to Saf ety Precautions
1. To adjust slack, use an Allen wrench ( ) to loosen the rear axle
holder fixing bolts ( ). 2
2. Turn the adjuster ( ) to decrease ( ) or increase ( ) chain slack. 3
3. Retighten the rear axle holder fixing bolts.
Rear axle holder fixing bolts torque:
21 N·m (2.1 kgf·m , 15 lbf·ft)
If a torque wrench is not used for installation, see your Honda dealer as
soon as possible to verify proper assembly.
REAR
(1) Allen wrench
(2) fixing bolts
156 Servicing Your Honda
on page 77 .
1
A
( ( B B ) )
( ( A A ) )
(3)
(3) adjuster
B
(1)
(2)