Suspension
Rear Suspension Damping
Refer to
Saf ety Precautions
Rebound Damping
LEFT REAR
(1)
(2)
(3)
(1) rebound damping adjuster
(2) punch mark
To adjust to the standard position:
1.
Turn the rebound damping adjuster ( ) clockwise until it will no
longer turn (lightly seats). This is the full hard setting.
2.
Turn the adjuster counterclockwise approximately
the punch mark ( ) on the adjuster aligns with the reference punch
2
mark ( ). This is the standard position.
3
To Reduce Rebound Damping (SOFT):
For a light load and smooth road conditions, turn the adjuster
counterclockwise toward SOFT (S).
To Increase Rebound Damping (HARD):
For a firmer ride and rough road conditions, turn the adjuster
clockwise toward HARD (H).
132
Servicing Your Honda
on page
77
.
(3) reference punch mark
1
1 6/8
turns so that