To Edit The Buttons On Lcd; To Move Buttons - Home Theater Master MX-1000 Operating Manual

8. To Edit the buttons on LCD

You can add or delete buttons, change the button size and shape,
move the button locations and edit the text on the buttons on LCD
screen in the EDITING Mode.
1. Go into setting mode by pressing both the MAIN and PAGE
buttons simultaneously for five seconds.
2. Move down the cursor in the LCD screen to 5. EDIT BUTTONS
using joystick.
3. Push down the joystick to enter the EDITING mode. The LCD will
list the following six choices to choose from and select the button you
wish to enter.
A. To Move Buttons:
This operation moves functional buttons to any location on the LCD
screen. It also moves the button from one page to another within the
selected device.
1. Set the cursor to COMMON BUTTON and select the device you
wish to enter. Select the functional button you wish to move in the
device page and move them with the joystick within the same page or
move to the next page by pressing the PAGE button. Once you
position the button at the location or page you desire, push the
joystick down to save it.
2. Repeat the above step to continue to move other buttons in the
same device.
3. If you wish to move buttons in another device, return to the main
menu by pressing the MAIN button and repeat from STEP 1.
4. Once the operation is completed and you wish to exit from this
mode, return to the main menu by pressing the MAIN button and then
20