To Erase The Learned Buttons - Home Theater Master MX-1000 Operating Manual

6. Programming the Remote Control
C. To Erase the Learned Buttons
1) To erase a single button:
1. Go to the program setting mode by pressing both the MAIN and
PAGE buttons simultaneously for five seconds.
2. Move the cursor to 4. Learning with the joystick and then push the
joystick down to enter the learning mode.
3. Move the cursor to COMMON BUTTON and select the device
that contains the functional button you wish to erase. If you wish to
erase the function in the device button, move the cursor to DEVICE
BUTTON.
4. Press the functional button or device button you wish to erase for
three seconds or more and it will flash "ERASED". Repeat this step
for other buttons you wish to erase.
5. Once you completed erasing and wish to exit from this mode,
press the MAIN button to go back to the main page of the learning
mode. Exit from the Main page by pressing both the MAIN and
PAGE buttons simultaneously.
6. You will be in the setting mode once again. Move the cursor to
8. TO EXIT and press down the cursor or simply press the MAIN
button to exit to the main menu.
2) To erase all the learned commands in a single device:
1. Go to the program setting mode by pressing both the MAIN and
PAGE buttons simultaneously for five seconds.
2. Move the cursor to 4. Learning with the joystick and then push the
joystick down to enter the learning mode.
14