The Edit And Label Buttons Window; The Edit And Label Buttons Toolbar; The Delete Window - Home Theater Master MX700 Manual

The Edit and Label Buttons Window

If the Edit and Label Window is closed, reopen it by clicking on the
Whenever you SELECT a button, the Edit and Label Buttons window displays the label, Device and IR code that is
programmed .

The Edit and Label Buttons Toolbar

Like the main toolbar, the shortcut buttons will display a hint if you hover your mouse over them. A single click acti-
vates their function.
TEST - For learned codes. Will only test pre-programmed codes if you have downloaded to the remote.
LEARN - Puts the software into learning mode, if an MX700 remote control is connected to the PC. See p 23
CONTINUE - When you are learning a number of IR codes, use CONTINUE mode to automatically save and
select the next button of that device.This saves tremendous time. See the section on LEARNING on page 24.
IR DATABASE - Another way to open the IR database window.
DELETE - Opens up the DELETE BUTTON window, which enables you to selectively delete any part of a but-
tons programming.

The Delete Window

Windows, Menus,Tools and Definitions
Simply click on the function you want to delete. For example, you can selec-
tively delete just a MACRO, leaving the button to perform a previously pro-
grammed learned IR command.
Or, you can delete all programming by selecting Button.
shortcut button on the toolbar.
11
T
H
E
M
X
7
0
0
D
U
A
L
R
E
M
O
T
E
S
Y
S
T
E
M