Home Theater Master MX-1000 Operating Manual page 16

6. Programming the Remote Control
3. Press the MUTE button to move the cursor to the DEVICE
BUTTON and keep the device button you wish to erase all the
learned commands down for five seconds until the LCD shows
ERASED. This will erase the function taught in the device button.
If you continue to press the device button for another five seconds,
it will erase all the functions in the device.
4. Once you complete the erasing and wish to exit from this mode,
press the MAIN button to go back to the main page of the learning
mode. Exit from the Main page by pressing the MAIN and PAGE
buttons simultaneously.
5. You will be in the setting mode once again. Move the cursor to
8. TO EXIT and press down the cursor or simply press the MAIN
button to exit to the main menu.
3) To erase all the learned commands in all twelve devices:
1. Go to the program setting mode by pressing both the MAIN and
PAGE buttons simultaneously for five seconds.
2. Move the cursor to 4. LEARNING with the joystick and then push
the joystick down to enter the learning mode.
3. Press both the POWER and STOP buttons simultaneously for five
seconds in the learning mode. The LCD will show ERASED after
it erased all the learned commands in the remote control.
4. Once you complete the erasing and wish to exit from this mode,
press both the MAIN and PAGE buttons simultaneously.
5. You will be in the setting mode once again. Move the cursor to
8. TO EXIT and press down the cursor or simply press the MAIN
button to exit to the main menu.
NOTE:
Preprogrammed code will be automatically restored when learned
function is crased.
15