System Board - HP EliteDesk 800 G1 Maintenance & Service Manual

System board

Description
System boards for use in EliteDesk 800 models:
Without the Windows 8 operating system
Windows 8 Standard
Windows 8 Professional
System boards for use in ProDesk 600 models:
Without the Windows 8 operating system
Windows 8 Standard
Windows 8 Professional
NetClone
The system board is secured with two Torx screws.
To remove the system board:
1.
Prepare the computer for disassembly (see
2.
Remove the access panel (see
3.
Remove the hard drive (see
4.
Remove the drive cage (see
5.
Remove the fan (see
6.
Remove the heat sink (see
7. Remove the M.2 SSD drive (see
8. Remove the memory modules (see
9. Remove the processor (see
10. Disconnect all cables from the system board, noting their location for reinstallation.
11. Remove the two Torx screws (1) that secure the system board to the computer.
Preparing to disassemble the computer on page
Access panel on page
Hard drive on page
Drive cage on page
Fan on page 46).
Heat sink on page
M.2 Solid-State Drive on page
Memory on page
Processor on page
26).
28).
47).
43).
51).
35).
44).
Spare part number
746632-001
746632-501
746632-601
746722-001
746722-501
746722-601
765381-001
25).
System board
57