Access Management - Planet GS-5220-16S8C User Manual

L2+ 24-port gigabit managed switch with hardware layer3 ipv4/ipv6 static routing
Hide thumbs Also See for GS-5220-16S8C:
Table of Contents

Advertisement

:
Click to undo any changes made locally and revert to previously saved values.
: Click to refresh the Page. Note that non-committed changes will be lost.

4.12.2 Access Management

Configure access management table on this Page. The maximum entry number is 16. If the application's type match any one of
the access management entries, it will allow access to the switch. The Access Management Configuration screen in
4-12-2
appears.
Figure 4-12-2: Access Management Configuration Overview Page Screenshot
The Page includes the following fields:
Object
 Mode
 Delete
 VLAN ID
 Start IP address
 End IP address
 HTTP/HTTPS
 SNMP
 TELNET/SSH
User's Manual of GS-5220-16S8C & GS-5220-16S8CR
Description
Indicates the access management mode operation. Possible modes are:
Enabled: Enable access management mode operation.
Disabled: Disable access management mode operation.
Check to delete the entry. It will be deleted during the next apply .
Indicates the VLAN ID for the access management entry.
Indicates the start IP address for the access management entry.
Indicates the end IP address for the access management entry.
Indicates the host can access the switch from HTTP/HTTPS interface that the
host IP address matched the entry.
Indicates the host can access the switch from SNMP interface that the host IP
address matched the entry.
Indicates the host can access the switch from TELNET/SSH interface that the
host IP address matched the entry.
272
Figure

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gs-5220-16s8cr

Table of Contents