Planet GS-5220-16S8C User Manual page 48

Add / Edit User
This Page configures a user – add, edit or delete user.
The Page includes the following fields:
Object
 Username
 Password
 Password (again)
 Privilege Level
Buttons
: Click to apply changes.
: Click to undo any changes made locally and revert to previously saved values.
: Click to undo any changes made locally and return to the Users.
: Delete the current user. This button is not available for new configurations (Add new user)
By default setting, most groups privilege level 5 has the read-only access and privilege level 10 has the
read-write access. And the system maintenance (software upload, factory defaults and etc.) need user
privilege level 15.
Figure 4-2-5: Add / Edit User Configuration Page Screenshot
Description
A string identifying the user name that this entry should belong to. The allowed
string length is 1 to 31. The valid user name is a combination of letters, numbers
and underscores.
The password of the user. The allowed string length is 1 to 31.
Please enter the user's new password here again to confirm.
The privilege level of the user.
The allowed range is 1 to 15. If the privilege level value is 15, it can access all
groups, i.e. that is granted the fully control of the device. But others value need to
refer to each group privilege level. User's privilege should be same or greater
than the group privilege level to have the access of that group.
User's Manual of GS-5220-16S8C & GS-5220-16S8CR
48