Planet GS-5220-16S8C User Manual page 30

Gigabit Ethernet Transceiver (1000Base-BX, Single Fiber Bi-Directional SFP)
Model Speed (Mbps)
MGB-LA10 1000
MGB-LB10 1000
MGB-LA20 1000
MGB-LB20 1000
MGB-LA40 1000
MGB-LB40 1000
MGB-LA60 1000
MGB-LB60 1000
MGB-TLA10 1000
MGB-TLB10 1000
MGB-TLA20 1000
MGB-TLB20 1000
MGB-TLA40 1000
MGB-TLB40 1000
MGB-TLA60 1000
MGB-TLB60 1000
1. It is recommended to use PLANET SFP on the Managed Switch. If you insert an SFP transceiver
that is not supported, the Managed Switch will not recognize it.
1. Before we connect the GS-5220-16S8C/GS-5220-16S8CR to the other network device, we have to make sure both sides
of the SFP transceivers are with the same media type, for example: 1000Base-SX to 1000Base-SX, 1000Bas-LX to
1000Base-LX.
2. Check whether the fiber-optic cable type matches with the SFP transceiver requirement.
 To connect to 1000Base-SX SFP transceiver, please use the multi-mode fiber cable with one side being the male
duplex LC connector type.
 To connect to 1000Base-LX SFP transceiver, please use the single-mode fiber cable with one side being the male
duplex LC connector type.


Connect the Fiber Cable
1. Insert the duplex LC connector into the SFP transceiver.
2. Connect the other end of the cable to a device with SFP transceiver installed.
3. Check the LNK/ACT LED of the SFP slot on the front of the Managed Switch. Ensure that the SFP transceiver is operating
correctly.
4. Check the Link mode of the SFP port if the link fails. To function with some fiber-NICs or Media Converters, user has to set
the port Link mode to "1000 Force" or "100 Force".
Connector
Fiber Mode
Interface
WDM(LC) Single Mode
WDM(LC) Single Mode
WDM(LC) Single Mode
WDM(LC) Single Mode
WDM(LC) Single Mode
WDM(LC) Single Mode
WDM(LC) Single Mode
WDM(LC) Single Mode
WDM(LC) Single Mode
WDM(LC) Single Mode
WDM(LC) Single Mode
WDM(LC) Single Mode
WDM(LC) Single Mode
WDM(LC) Single Mode
WDM(LC) Single Mode
WDM(LC) Single Mode
User's Manual of GS-5220-16S8C & GS-5220-16S8CR
Distance Wavelength (TX) Wavelength (RX) Operating Temp.
10km 1310nm
10km 1550nm
20km 1310nm
20km 1550nm
40km 1310nm
40km 1550nm
60km 1310nm
60km 1550nm
10km 1310nm
10km 1550nm
20km 1310nm
20km 1550nm
40km 1310nm
40km 1550nm
60km 1310nm
60km 1550nm
30
1550nm 0 ~ 60 ℃
1310nm 0 ~ 60 ℃
1550nm 0 ~ 60 ℃
1310nm 0 ~ 60 ℃
1550nm 0 ~ 60 ℃
1310nm 0 ~ 60 ℃
1550nm 0 ~ 60 ℃
1310nm 0 ~ 60 ℃
1550nm -40 ~ 75 ℃
1310nm -40 ~ 75 ℃
1550nm -40 ~ 75 ℃
1310nm -40 ~ 75 ℃
1550nm -40 ~ 75 ℃
1310nm -40 ~ 75 ℃
1550nm -40 ~ 75 ℃
1310nm -40 ~ 75 ℃