Assembly - Ariens Sno-Thro 939003-ST520E Owner's/Operator's Manual

WARNING: AVOID INJURY. Read and
understand the entire Safety section before
proceeding.
WARNING: Dropping or tipping over boxed
unit could result in personal injury or damage
to unit.
PACKAGE CONTENTS
2
1
4
1. Discharge Chute
2. Chute Crank
3. Sno-Thro Unit
Figure 3

ASSEMBLY

Tools Required:
• Pliers
• Open-End Wrenches: 3/8, 7/16, 1/2,
9/16 in. and/or Adjustable Wrench
• Tire Gauge
Unfold Handlebar (Figure 4)
1. Remove the lower and loosen the upper
hardware on the handlebar assembly.
2. Rotate the handlebars into operating position.
3. Install and tighten the hardware on the handlebar
assembly.
ASSEMBLY
3
4. Literature Pack with
Extra Shear Bolts
1
1. Lower
Handlebar
2. Hardware
Install Discharge Chute
(Figure 5)
1. Grease underside of discharge chute ring (if not
already greased).
2. Remove mounting hardware from the bottom of
the chute pedestal.
3. Install discharge chute over opening in the auger
housing and secure pedestal to auger housing
with hardware removed in step 2.
1
1. Mounting Hardware
2. Discharge Chute
GB - 9
1
3
3. Upper
Handlebar
Figure 4
1
2
3. Discharge Chute Ring
4. Chute Pedestal
Figure 5
2
OS7035
3
4
OS7050
OS7055