Selecting The File Format - Sagem MF9500 Operation Manual

SCANNING SETTINGS (ORIGINAL SIZE, RESOLUTION, EXPOSURE, AND FILE FORMAT)

SELECTING THE FILE FORMAT

When you send an image to one or more recipients using Scan to E-mail or Scan to FTP, the FILE FORMAT key
enables you to temporarily override the individual file format settings (FILE TYPE / COMPRESSION MODE) stored for
each recipient and send the image to all of the recipients using a single file format setting.
"PROGRAMMED" is initially selected, which means that the file format settings stored for each recipient are used.
1
Touch the FILE FORMAT key.
STANDARD
RESOLUTION
PROGRAMMED
FILE FORMAT
AUTO A4
ORIGINAL
2
Select the file type and the compression mode.
READY TO SEND.
AUTO
EXPOSURE
FILE TYPE
STANDARD
PDF TIFF
RESOLUTION
TIFF-F
PROGRAMMED
FILE FORMAT
AUTO A4
ONE PAGE PER FILE
ORIGINAL
NOTE
When the "ONE PAGE PER FILE" checkbox is not selected,
all scanned pages are combined into a single file. When
the checkbox is selected, one file is created per page.
OK
COMPRESSION MODE
MH (G3)
NONE
MMR (G4) PROGRAMMED
3
Touch the OK key.
OK
COMPRESSION MODE
MH (G3)
NONE
ED MMR (G4) PROGRAMMED
NOTES
• The initial file format setting can be changed with the
key operator program. (Page 29)
• Even if you change the settings in the FILE FORMAT
setting screen, you can return to the settings stored for
each recipient by selecting "PROGRAMMED" once
again.
The PROGRAMMED key returns both the file type and
compression mode to the stored file format settings
regardless of which key is touched. You cannot return
only the file type, or only the compression mode, to the
stored setting.
• When you perform a broadcast transmission, the
compression mode selected in the key operator program
has precedence over the others.
You will return to the initial
screen.
17