Selecting The Exposure - Sagem MF9500 Operation Manual

SCANNING SETTINGS (ORIGINAL SIZE, RESOLUTION, EXPOSURE, AND FILE FORMAT)

SELECTING THE EXPOSURE

After loading the original, you can adjust the contrast as needed for the darkness and type of the original. After loading
the original in scanner mode, adjust the settings as explained below. The initial exposure setting is AUTO.
Change the exposure.
1
Touch the EXPOSURE key.
AUTO
EXPOSURE
STANDARD
RESOLUTION
PROGRAMMED
FILE FORMAT
AUTO A4
2
Touch the desired exposure key.
DARK LIGHT
AUTO
ORIGINAL ORIGINAL
3
Touch the OK key.
OK
LIGHT
NOTE
When using the document glass to scan pages,
the exposure setting can be changed each time you
change pages. When using the automatic document
feeder, the exposure setting cannot be changed once
scanning has begun.
16
If the Fax Expansion Kit (SG-FEK)
has been installed, the
SPECIAL MODES key will
appear in place of the
EXPOSURE key. In this
case, press the SPECIAL
MODES key and then press
the EXPOSURE key.
The selected key is
highlighted.
You will return to the initial
screen.
Exposure settings
Dark Select this setting if your original consists
Original mostly of dark characters.
This setting automatically adjusts the ex-
Auto posure for light and dark parts of the origi-
nal.
Light Select this setting if your original consists
Original mostly of faint characters.