Dolby Digital Mode And Dts Surround - Denon AVR-1906 Operating Instructions Manual

ENGLISH
Basic Operation
INPUT MODE STANDARD
SURROUND MODE
FUNCTION SURROUND PARAMETER

Dolby Digital mode and DTS Surround

(only with digital input)
1
Select an input source set to digital (COAXIAL/
OPTICAL) ( page 36).
Example: DVD
(Main unit)
2
INPUT MODE
Press the
mode to "AUTO" or "DTS".
3
STANDARD
Press the
STANDARD (Dolby/DTS Surround) mode.
When performing this operation from the main unit's panel,
press the SURROUND MODE button, then turn the SELECT
knob and select Dolby Pro Logic
STANDARD
ON SCREEN
SELECT
INPUT MODE
4
Play a program source with the
symbol.
• The Dolby Digital indicator lights
when
sources.
• The DTS indicator lights when
playing DTS sources.
Operate the SURROUND BACK button
to switch Surround Back CH ON/OFF.
• The SURROUND BACK indicator
lights when the SURROUND BACK
(Remote control unit)
button is on.
button to set the input
5
Press the
• The surround parameter menu is displayed.
button to select the
II x or DTS NEO:6.
FUNCTION
SURROUND
ENTER
PARAMETER
CURSOR
SURROUND
BACK
playing Dolby Digital
SURROUND PARAMETER
button.
21
ENGLISH
6
SURROUND PARAMETER
Press the
CURSOR D D
press the
various parameters.
7
SELECT
Turn the
F F G G
or button to adjust the parameter settings.
8
ENTER
Press the button to finish the surround
parameter mode.
• When making parameter settings, the display will return to the
regular condition several seconds after the last button was
pressed and the setting will be completed.
2 Surround parameters e
CINEMA EQ. (Cinema Equalizer):
The Cinema EQ function gently decreases the level of the
or
extreme high frequencies, compensating for overly-bright
sounding motion picture soundtracks. Select this function if the
sound from the front speakers is too bright.
Lights
This function only works in the Dolby Pro Logic
Digital, DTS Surround and DTS NEO:6 modes. (The same
contents are set for all operating modes.)
Lights
D.COMP. (Dynamic Range Compression):
Motion picture soundtracks have tremendous dynamic range
(the contrast between very soft and very loud sounds). For
Lights
listening late at night, or whenever the maximum sound level is
lower than usual, the Dynamic Range Compression allows you
to hear all of the sounds in the soundtrack (but with reduced
dynamic range). (This only works when playing program
sources recorded in Dolby Digital or DTS). Select one of the
four parameters ("OFF", "LOW", "MID" (middle) or "HIGH").
Set to OFF for normal listening.
Basic Operation
button, and
H H
or button to select the
CURSOR
knob, and press the
II
x, Dolby