Connecting A Vcr; Connecting A Tape Deck; Connecting A Cd Recorder Or Md Recorder - Denon AVR-1906 Operating Instructions Manual

Connecting Other Sources

Connecting a VCR

• For best picture quality choose the component video connection to your VCR. S-Video and
composite video outputs are also provided.
• If you wish to perform analog dubbing from a digital source, such as a DVD recorder to an analog
recorder such as a cassette deck, you will need to connect the analog inputs and outputs as
shown below, in addition to the digital audio connections.
• The digital inputs and outputs connection is the same as that for a CD (MD) recorder.
NOTE:
• When recording to VCR, it is necessary that the type of cable used with the playback source
equipment be the same type that is connected to the AVR-1906 VCR OUTPUT terminal.
→ S-Video cable : VCR OUT → S-Video cable
Example: VCR IN
VCR IN → Video cable : VCR OUT → Video cable
Video deck
F
VIDEO
OUT
G
S VIDEO
OUT
F
• If humming noise is generated, move the tape deck further away from the source of such noise.
VIDEO
IN
G
S VIDEO
IN
A AUDIO IN
L
L L
If you wish to perform analog dubbing from a digital source, such as a CD or MD recorder to an
R R
R
analog recorder such as a tape deck, you will need to connect the analog inputs and outputs as
shown below, in addition to the digital audio connections.
A AUDIO OUT
L
L L
R R
R
14
ENGLISH

Connecting a tape deck

Connecting a CD recorder or MD recorder

NOTE:
• Do not connect the output of the component connected to the OPTICAL 2 OUT terminal on
the AVR-1906's rear panel to any terminal other than the OPTICAL 2 IN terminal (
ENGLISH
Connecting Other Sources
Tape deck
AUDIO OUT
A
L
L L
R R
R
AUDIO IN
A
L
L L
R R
R
CD recorder /
MD recorder
AUDIO OUT
A
L
L L
R R
R
D
OPTICAL
OUT
D
OPTICAL
IN
AUDIO IN
A
L
L L
R R
R
page 36).