Specifications; General Description - Panasonic KX-TDA600 Installation Manual

1.4 Specifications

1.4.1 General Description

Control Bus
Communication Bus
Switching
Power Input
External Battery
Maximum Power Failure Tolerance
Memory Backup Duration
Dialling
Mode Conversion
Ring Frequency
Trunk Loop Limit
Operating
Environment
Conference Call Trunk (per shelf)
Music on Hold (MOH)
Paging
Serial Interface
Port
Original bus (16-bit, 8 MHz, 10 megabytes per second)
H.100 bus conformity (1024 time slots)
Distributed Switching
PSU-M 100 V AC to 130 V AC; 2.5 A/200 V AC to 240 V AC; 1.4 A; 50
Hz/60 Hz
PSU-L 100 V AC to 130 V AC; 5.1 A/200 V AC to 240 V AC; 2.55 A;
50 Hz/60 Hz
+36 V DC (+12 V DC ´ 3, recommended maximum capacity per
shelf is 28 Ah)
300 ms (without using backup batteries)
7 years
Trunk Dial Pulse (DP) 10 pps, 20 pps
Tone (DTMF) Dialling
Extension Dial Pulse (DP) 10 pps, 20 pps
Tone (DTMF) Dialling
DP-DTMF, DTMF-DP
20 Hz/25 Hz (selectable)
1600 W maximum
Temperature 0 °C to 40 °C
Humidity 10 % to 90 % (non-condensing)
From 10 ´ 3-party conference call to 4 ´ 8-party conference call
2 ports (Level Control: -11 dB to +11 dB in 1 dB steps)
MOH1: External Music Source port
MOH2: Selectable Internal/External Music Source port
Internal Level Control: -15 dB to +6 dB in 3 dB steps
External 2 ports (Volume Control: -15 dB to +15 dB in 1 dB steps)
RS-232C 1 (maximum 115.2 kbps)
USB 1
1.4.1 General Description
Installation Manual 33