Connecting A Cell Station To The Pbx - Panasonic KX-TDA600 Installation Manual

Panasonic hybrid ip-pbx installation manual
Hide thumbs Also See for KX-TDA600:
Table of Contents

Advertisement

2.12.7 Connecting a Cell Station to the PBX

2.12.7 Connecting a Cell Station to the PBX
Note
When connecting both KX-TDA0155 and KX-TDA0158 CSs to the same card, the KX-TDA0158 CSs must
be connected to lower-numbered pins on the card than the KX-TDA0155 CSs.
Refer to the following examples to connect a CS to the PBX.
KX-TDA0155
Cable
ø 0.4 mm:
ø 0.5 mm:
ø 0.6 mm:
CS (RJ11)
Signal Name
D1
D2
Accessories and User-supplied Items for the CS
Accessories (included): Screws ´ 2, Washers ´ 2
User-supplied (not included): RJ11 connector
Note
For details about DHLC card or DLC card, refer to "2.7.2 DHLC8 Card (KX-TDA0170)", "2.7.3 DLC8 Card
(KX-TDA0171)", or "2.7.4 DLC16 Card (KX-TDA0172)".
282
Installation Manual
Maximum Distance
222 m
347 m
500 m
Pin No.
1
2
3
4
DHLC8 Card
DHLC/DLC card (Amphenol)
Signal Name
D1
D2

Advertisement

Table of Contents
loading

Table of Contents