Panasonic KX-TDA600 Installation Manual page 255

PS Registration
[690]
ENTER
* Without an EMEC card installed: 001 to 256.
With an EMEC card installed: 001 to 512.
When the PS has not been registered yet
When registering the PS for the first time, it is possible to select the desired language for the display. (You do
not need to enter the PS system programming mode when registering for the first time.)
Using the KX-TD7684/KX-TD7694
Press
POWER for
2 seconds.
Using the KX-TD7680
Press
POWER for
2 seconds.
Using the KX-TD7690
Press
POWER for
2 seconds.
When the PS has already been registered to another PBX
One PS can be registered to a maximum of 4 different PBXs.
Using the KX-TD7684/KX-TD7694
Select
"Register H/S".
Using the KX-TD7680
Select
"REGISTRATION".
PS No.* Extn. No.
1 to 4 digits
Select the desired
language.
[ F2 ] [ F3 ]
Press S2 repeatedly Press S3
to select the desired for 2
language. seconds.
F3
F2
Press S2 repeatedly Press S3
to select the desired for 2
language. seconds.
Choose
"Base 1–4".
Choose
"SYSTEM 1–4".
2.11.7 Connecting a Cell Station to the PBX
To the PS
operation
below
ENTER
C.Tone C.Tone
Press "F"
for 2
seconds.
C.Tone
C.Tone
C.Tone
C.Tone
END
(HOLD)
Installation Manual 255