Table of Contents
Advertisement
T R A V E L L E R ' S
I M A G E
i
For a STAB motor use an input power of 70mA and activate the
GOTOxx° function.
If you want to make use of the USALS protocol, no further settings are necessary.
Your Dreambox will turn the motor to the correct position when you start scanning all
transponders.
If your motor does not support the USALS protocol, you'll have to search and store a ll
satellites one by one.
to the chosen satellite
DRIVE TO 0°: drives the motor to its 0-point
RECALCULATE: re-initialises the pre-stored memory positions in your motor
(return to default factory configuration)
SET EAST LIMIT: stores the east limit of your motor
SET WEST LIMIT: stores the west limit of your motor
DISABLE LIMITS: deactivates the software limits set by you
ENABLE LIMITS: enables the software limits set by you
If you're manually searching for a satellite, first select the satellite name from the box,
pick a random transponder and start turning the motor with the cursor keys. Keep an
eye on the meters below. When Lock and Sync are checked, a good signal has been
found and the satellite can be stored in one of the memory positions of your motor.
SID
This menu item currently does nothing.
Now press the BLUE button. On this screen,
you can select different modes:
POSITION: manually seek the location of
the selected satellite name by using the left
and right cursor keys
DRIVE TO STORED POS: drives the
motor to the chosen memory position
DRIVE TO SATELLITE: drives the motor
22
Advertisement
Table of Contents
