Service Control Board - Cornelius Granita Training Manual

4. Remove the left side panel to service fuses.

Service Control Board

5. a. Open the control panel door, push the control panel door to
either side and pull forward to remove.
c. Be careful not to loose the plastic stand offs when separat-
ing the display and main boards. Note: It is a good idea to
mark all connections before disconnecting the wires.
c. Remove the 2 screws from the upper plastic molding and lift the
left side panel out of the lower plastic molding.
© 2003, IMI Cornelius Inc. - 31 -
Ice Peak Training Manual
Low
Voltage
Fuse
10A
High
Voltage
Fuses
20A
FIGURE 47
FIGURE 48
Screws
FIGURE 49
Publication Number: TP01057