For Service - Cornelius IACSSO Use And Care Manual

If you need service or assistance, we suggest
you follow these steps:
Before calling for service . . .
Performance problems often result from little things
you can find and fix yourself, without tools of any
kind.
Unit does not run:
l
Cycle Control Knob must be in the "ON" position.
l
Check to see that the power cord is plugged in.
l
Check for a blown fuse or tripped circuit breaker
in the electrical supply to the machine.
l
Room temperatures must be above 55°F (13°C).
Otherwise, the Bin Thermostat may sense a cold
room temperature and shut off even though the
storage bin is not full of ice. Also, the unit may not
restart once it does shut off.
Unit runs but does not produce ice:
l
Cycle Control Knob must be in the "ON" position.
l
Check water supply to make sure it is open.
l
If ice machine is operated at an elevation above
2000 feet above sea level, both the Bin Thermo-
stat and the Ice Thickness Thermostat need to be
recalibrated. See Installation Instructions.
Unit runs but produces very little ice:
l
Room temperature may be extremely high (over
90°F (32°C)). In this case, it is normal for ice
production to be low.
l
Dirt or lint may be blocking the airflow through
the finned condenser. Condenser needs to be
cleaned.
l
Check to see if the unit has a scale buildup in the
water and/or freezing systems. Clean them, if
necessary.
Grid is not cutting ice sheets:
l
Check the grid harness plug to make sure the
connection is secure.
Off taste in ice cubes:
. There may be an unusually high mineral content
in the water supply. Water may need to be
filtered or treated.
l
Do not store any foods in the ice bin.
l
Packaging materials are not all removed.
10