Assignment Of Digital Audio Inputs And Outputs - Loewe Xelos A 32 Operating Instructions Manual

Operating additional equipment
Assignment of digital audio inputs and
outputs
Audio input "AUDIO DIGITAL IN"
The TV set has a coaxial digital audio input "AUDIO DIGITAL IN" and a
coaxial digital audio output "AUDIO DIGITAL OUT". If you are using an
external digital surround amplifi er for sound reproduction, you have to feed
digital audio signals to the TV, e.g. from the DVD player.
DVD
MULTICHANNEL AUDIO OUT
LEFT CENTER LEFT
REAR FRONT
DIGITAL AUDIO OUT
STEREO OUT VIDEO OUT
PCM/MPEG2/AC3/DTS
MAINS
L
RIGHT SUBW. RIGHT R (CVBS) (Y/C)
DIG OUT S-VIDEO OUT
OPT OUT REAR FRONT AUDIO VIDEO OUT
Connect the output socket of the DVD player (DIG OUT) to the TV's "AUDIO
DIGITAL IN" socket with a cinch cable.
In the connection wizard you specify that sound transmission is to be
digital. Specify that the digital sound is to be assigned for example to the
Euro AV socket 2 to pass on the digital sound to the digital audio output of
the TV set and via this to the external audio amplifi er. Further information
about this can be found on page 26.
24
AUDIO DIGITAL
AV2
IN OUT
Surround Amplifier
I PREOUT
I AUX1 IN AUX OUT AUX 2
AUX- /O
FL C FR L L
DIGITAL
IN
II
DIGITAL
TO TV- I /O
OUT
SL SUB SR
R R
Audio output "AUDIO DIGITAL OUT"
The digital audio signal is applied at the "AUDIO DIGITAL OUT" socket of
the TV. For example, you can connect an external digital audio amplifi er or
the Loewe Auro system here.
An analog audio signal from the TV set or another sound source which is re-
ceived at one of the Euro-AV sockets of the TV set is converted into a digital
signal (PCM) and output at the "AUDIO DIGITAL OUT"socket. Conversion
from external analog AV sources to PCM is not possible if the loudspeaker
of the TV set is used as a center channel. In this case connect your audio
amplifi er additionally to the TV (AUDIO OUT L/R) with a cinch cable and
switch the audio amplifi er to analog audio input.
The digital TV sound or the digital sound of a connected auxiliary device
is only audible via an external digital audio amplifi er (e.g. Loewe Auro
system).