Select Picture Format; Tv Menu - Loewe Xelos A 32 Operating Instructions Manual

Modes of operation

Select picture format

The TV set sets the best picture format automatically when
AMD is switched on. If you want to set a different format,
press this button until the desired format is selected or
select the format with 34.
Picture format
16:9

TV menu

Call up the TV menu
TV menu
Picture
Picture adjustment
You will fi nd a description of the picture and sound settings on page 13. The
TV menu offers others for recording and connections and for TV settings
Under "Recording" you will fi nd the functions:
Program new timer recordings
• via EPG • via teletext (VPT) • manual
You will fi nd further information about timer recording on page 23.
Timer overview
Here you will fi nd a list of channels programmed for recording. You can
change the recording data or delete programmed recordings completely and
program new recordings.
Recording lead time and lag time
For recordings without VPS you set a lead and lag time here so that the
program is fully recorded in case of slight differences in the time.
Under "Connections" you will fi nd the following functions:
New devices/modifi cations (connection wizard)
The connection wizard helps you connect and log in additional equipment
such as video recorders, DVD players/recorders, camcorders/digital cameras,
pay TV decoders, equipment with component signals and digital HDMI/DVI
signals.
Antenna DVB *
• Antenna DVB-T • Satellite DVB-S
You will fi nd further details in another operating manual.
Panorama
4:3 Cinema Zoom
Sound Recording Connections
3 3
...
Digital Link Plus
Transmission of the program data from the TV set to the video/DVD recorder
if a recorder with Digital Link Plus is recorded.
Miscellaneous (connections)
• Set AV standard for the connections manually (if it is not recognized
automatically).
• "Assign audio digital signals" to one of the AV sockets.
• "Allow switching voltage" to display the signals of the connected device
immediately on the screen via Euro AV during playback
• RGB insertion at AV2 to play back RGB signals at all station slots.
Select decoder stations and set sound coding.
INFO END
Under "Settings" you will fi nd the following functions:
Settings
Channels
Here you can search for and store new stations automatically or manually.
In "Change stations" you can re-sort and delete stations and change sta-
tion names.
• Automatic search • Manual adjustment • Change stations
Parental lock
You can lock the TV "from now" or daily for a certain time.
Timer functions
You can have your TV switch off at pre-programmed times or wake
you/remind you with radio or TV. If you are not present at the time, a safety
prompt makes sure the TV switches off again after 5 minutes.
• Switch off once only • Switch off daily • One-time reminder
• Wake up Mon-Fri • Wake up Sat • Wake up Sun • Wake up with *
• Wake up signal volume
Language
If "your" menu language is not set, you have to select the "Language"
menu in a language that you do understand. Therefore here is a simple way
to set the right menu language:
1. Press the INFO button (index), select the fi rst listing (this is above A).
2. Call the language selection by pressing OK button.
3. Now mark the desired language and confi rm it by pressing the OK key.
4. Hide the menu again with the END button.
15