Assign Digital Audio Input - Loewe Reference lD 55 User Manual

Reference ID 40-55
User guide
System settings
Connections

Assign digital audio input

In order to be able to hear also the digital sound of an external device
connected to an AV input, an AV input can be assigned to the digital
audio input socket SPDIF IN of your TV set. By switching to this AV
input, the digital audio signal at the SPDIF IN input is communicated
to the integrated digital multi-channel audio decoder and the digital
audio output socket SPDIF OUT. You will then hear the digital sound
of the assigned AV input instead of the analogue sound if available.
Connecting devices to the digital audio input
For the digital audio playback from an external device, e.g. the DVD
player, you have to feed the digital audio signal to the TV set.
The external digital audio signal can be reproduced via the digital mul-
tichannel audio decoder integrated in the TV set or via an externally
connected digital audio amplifier.
If an external audio amplifier is used, this must be
registered in the sound components wizard.
HOME: Call Home view.
Mark System settings,
OK call System settings.
Mark Connections,
go to next column.
Select Assign digital audio input,
go to next column.
Select AV input.
...
Assign digital no
audio input
to AVS
to HDMI1
to HDMI2
to HDMI3
to HDMI4
to PC IN
OK adopt.
To connect a DVD player to the digital audio input of
the TV set, for example, connect the digital output
socket of the DVD player (DIGITAL OUT) via a cinch
cable to the SPDIF IN socket on the TV set (see right
hand column).
If a device connected to an AV input is connected
additionally to the digital audio input (SPDIF IN socket) of
the TV set, you have to select this AV input here if you want to
listen to the sound of the set in digital quality. IF you select
"no", you hear the analogue sound.
TV-Gerät
DVD-Spieler
DIGITAL
AV
OUT
Connection example for a DVD player
SPDIF
IN
AV
125