Call Additional Functions; Call Timer Overview; Select Picture Format; Move Picture Up/Down - Loewe Individual 40 Selection Operating Instructions Manual

Operating modes – TV

Call additional functions

Select additional functions such as Image+ , Teletext subti-
tles, Personal teletext pages, Headphone volume,
Scan stations and to move the picture up and down.
Additional functions
Image+
off

Call timer overview

If timer recordings have been programmed, you will see when
which station is recorded here.
Timer list
12.09. 18:00-18:30 3SAT Die Köchin, die Putzfrau und d
Detail
TEXT

Select picture format

The TV set sets the best picture format automatically when
Auto format is switched on. If you want to set a different
format, press this button until the desired format is selected or
select the format with
Picture format
16:9
You can switch the panorama picture over to distortion-free representation on
your TV set. Dark margins are then visible on the left and right of the picture.
Switching over: Keep the M button on the set pressed, at the same time press
the "Picture format" button on the remote control briefly.
Resetting: Press the same button combination again.

Move picture up/down

To make picture subtitles visible, you can use
the picture up or down with the picture formats "Panorama",
"Cinema" and "Zoom".
Note: for DVB-T stations in GB you can switch back and forth quickly between
two stations using this button.
- 20
Teletext subtitles Personal teletext pages
...
Fri 12.09./14:12
New recording Change
Delete
.
4:3 Panorama
Cinema Zoom
to move

TV menu

Call up the TV menu
END
INFO
You will find a description of the picture and sound settings on page 18. The TV
menu offers other options for recording, connections and settings of the TV set.
For a recorder that is logged in, you can find the following
menus in the "Recording":
Recording wizard - to programme new timer recordings
• Via EPG • Via teletext
You will find further information about timer recording on page 32.
Timer list
Here you will find a list of programmes programmed for recording. You can
change the recording data or delete programmed recordings and programme
new recordings.
END
INFO Pre-record time and Post record time
For recordings without VPS/PDC, set a lead and lag time here so that the pro-
gramme is fully recorded despite any slight differences in the time.
Under "Connections" you will find the following functions:
New devices/modifications (connection wizard)
The connection wizard helps you connect and log in additional equipment such
as video recorders, DVD players/recorders, camcorders/digital cameras, pay TV
decoders, equipment with component signals and digital HDMI/DVI signals.
Antenna DVB
• Antenna DVB-T
You can find more information on pages 12 and 13.
Digital Link Plus
Transmission of the station data from the TV set to the video/DVD recorder if a
recorder with Digital Link Plus is connected.
Miscellaneous (connections)
• Set AV norm for the connections manually (if it is not recognised automati-
cally).
• "Assign audio digital signals" to one of the AV sockets.
• "Allow switching voltage" to display the signals of the connected device
immediately on the screen via Euro AV during playback.
• RGB insertions at AV2 to play back RGB signals at all station storage locations.
• Select decoder stations and set sound encoding.
(1 only for sets with DVB-S
TV menu
Picture Recording
Sound
Picture adjustment ...
• Manual
• Antenna DVB-S (1
INFO END
Connections Settings