Lifting - Yamaha AR240 HO Owner's Manual

Hide thumbs Also See for AR240 HO:
Table of Contents

Advertisement

3
O
peratiOn

LIFTING

NOTICE:
Do not attach lifting cables to the
bow eye, cleats, water-ski tow eye,
or grab handles. Serious damage
to the boat can occur. Use only a
sling designed specifically for lifting
boats.
If you need to remove the boat from the
water without a trailer, use these guide-
lines:
Use a sling-type lifting mechanism
designed for lifting boats. The sling
should be covered with a protective
material to prevent damage to the
hull gelcoat.
Use spreader bars to avoid side
stress to the hull that may cause
cracks in the gelcoat and fiber-
glass.
Attach guidelines to the bow eye
and stern tie-down cleats to control
movement of the boat during lift-
ing.
Remove all people and all cargo
from the boat. Drain any excess
water from the bilge using the bilge
pump.
Be sure all people are standing
clear, then lift boat slowly and just
far enough to verify that the boat
is securely held and properly bal-
anced. If necessary, lower the boat
again and adjust the slings.
When ready, lift the boat slowly and
carefully.
3-32

Advertisement

Table of Contents
loading

This manual is also suitable for:

242 limited sSx240 ho

Table of Contents