Yamaha AR240 HO Owner's Manual page 74

3
O
peratiOn
5) Collapse the front support poles
until the snap buttons click into
place to tighten the top fabric.
7
7 Collapsed Support Pole
NOTICE:
Do not exceed 45 mph (72 km/h)
with the Bimini top in the deployed
position.
Storing
1) Extend the forward support poles by
pressing in the snap buttons.
2) Remove the spring-loaded pins.
Push the forward support poles
back and clip the plastic supports
into place on the other support
poles.
3) Unzip the flaps holding the top to
the rearmost tower tube.
4) Roll the fabric around the frame. Put
on the storage cover and zip it into
place.
5) Secure the top to the tower using
the straps provided.
Trailering with the Bimini Top
The top must be in the lowered position,
covered, and strapped to the tower or
removed from the tower entirely before
attempting to trailer the boat.
Removing the Bimini Top
1) Follow the steps for storing.
2) Remove the lock pins holding the
Bimini top to the mounting brackets.
3) The top can now be removed from
your boat.
When reinstalling the Bimini top, simply
reverse the removal steps making sure
the lock pins are fully engaged.
Bimini Top Limited S
Raising from the Collapsed Posi-
tion:
1) Unbuckle the cover straps from
around the top tubes of the wake-
board tower, then unzip and remove
the storage cover.
2) Zip the four flaps at the front of the
canvas around the top tubes of the
tower.

 Zippered flaps
 Plastic clip
3
Rear supports
3) Unfold the top by pulling it to the
back of the boat (toward the stern).
3-14
2
3