5
t
rouble
5) To reinstall the access port cap,
first clean off any sand or other
foreign matter from the cap or port
surfaces. Apply a light coat of Ya-
malube Waterproof Marine Grease
(P/N:
ACC-GREAS-10-CT)
needed to the seal of the clean-out
port caps. Clean any debris from
the clean-out port cap and seal
before applying grease to the seal.
Insert the cap so that its slot faces
the bow and lines up with the pro-
jection in the access port wall.
6) Press the T-handle down firmly to
lock the cap in place. Pull up force-
fully on the handle to be sure it is
locked. If a strong pull will move
the handle, it is not locked securely
– the cap could be forced out by
water pressure during operation.
r
ecovery
as
NOTICE:
Be sure the caps are locked se-
•
curely in place. Otherwise, the
cap could be forced out of the
access ports by water pressure,
causing loss of performance
and possible damage.
•
The hatch cover has interlocks
to shut off the engines should
the hatch be accidentally opened
during operation. The engines
will not restart unless the hatch
is closed and latched.
5-6