Yamaha AR 210 Owner's/Operator's Manual
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Boat
  5. SX210
  6. Owner's/operator's manual

Yamaha AR 210 Owner's/Operator's Manual

Hide thumbs Also See for AR 210:
Table of Contents

Advertisement

Quick Links

Download this manual
AR/SX 210
Owner's/Operator's Manual
Read this manual carefully
G
N
N I
R
A
W
before operating this boat.

Advertisement

Table of Contents
loading

Related Manuals for Yamaha AR 210

Summary of Contents for Yamaha AR 210

  • Page 1 AR/SX 210 Owner’s/Operator’s Manual Read this manual carefully before operating this boat.
  • Page 2 The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. YAMAHA LIT-CALIF-65-01 Read this manual carefully before operating this boat. This manual should stay with the boat if sold.
  • Page 3 TO THE OWNER Thank you for choosing a Yamaha Boat. IMPORTANT MANUAL INFORMATION: In this manual, information of particular This Owner’s Manual contains informa- importance is distinguished in the fol- tion you will need for proper operation, lowing ways: maintenance, and care. A thorough understanding of these simple instruc- This is the safety alert symbol.
  • Page 5 AR210/SX210 AFETY NFORMATION & F EATURES UNCTIONS PERATION & C AINTENANCE ROUBLE ECOVERY 4-colo ONSUMER NFORMATION 1-color 1-color...

  • Page 7: Table Of Contents

    Chapter 1 SAFETY INFORMATION IDENTIFICATION NUMBER RECORDS ......1-1 Primary I.D. Number ........1-1 Hull Identification Number (H.I.N.) .

  • Page 9: Identification Number Records

    Record your Primary I.D., H.I.N., and engine numbers in the spaces provided to assist you in ordering spare parts from your Yamaha Boat dealer. Also record and keep these I.D. numbers in a separate place in case your boat is stolen.

  • Page 10: Emission Control Information

    REFER TO THE OWNER’S MANUAL FOR MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS. FELS (HC+NOx/CO): g/kW-hr MANPOWER: kW DISPLACEMENT: liters TROLLING SPEED: SPARK PLUG: SPARK PLUG GAP (mm): FUEL: UNLEADED REGULAR GASOLINE VALVE LASH (MM) IN: YAMAHA MOTOR CO, LTD MANUFACTURED DATE LABEL Manufactured date label YAMAHA Manufactured:...

  • Page 11: Important Labels

    AFETY NFORMATION IMPORTANT LABELS Read the following labels before operating this boat. If you need any additional information, contact a Yamaha dealer.
  • Page 12 AFETY NFORMATION If any of these labels is damaged or missing, contact a Yamaha dealer for a replacement.

  • Page 13: Nformation

    AFETY NFORMATION Carbon monoxide (CO) can cause brain damage or death. Engine and generator exhaust contains odorless and colorless carbon monoxide gas. Carbon monoxide will be around the back of the boat when engines or generators are running. Move to fresh air if you feel nausea, headache, dizziness, or drowsiness.

  • Page 14: Other Labels

    AFETY NFORMATION OTHER LABELS 1670 THIS BOAT COMPLIES WITH U.S. COAST GUARD SAFETY STANDARDS IN EFFECT ON THE DATE OF CERTIFICATION TENNESEE WATERCRAFT INC., VONORE, TN NATIONAL MARINE MANUFACTURERS ASSOCIATION...

  • Page 15: Limitations On Who May Operate The Boat

    LIMITATIONS ON WHO MAY OPERATE THE BOAT • Yamaha recommends a minimum operator age of 16 years old. • Adults must supervise use by minors.

  • Page 16: Required Equipment

    • Oar or paddle (look for one with a Contact your Yamaha dealer or the boat hook on the other end). Coast Guard for more information. • Spare parts, such as an extra set of •...

  • Page 17: Cruising Limitations

    AFETY NFORMATION CRUISING LIMITATIONS sis), facial injuries, and broken legs, ankles, and other bones. Do not • Scan constantly for people, objects, jump waves or wakes. and other watercraft. Be alert for • Do not operate the boat in rough conditions that limit your visibility or water, bad weather, or when visibility block your vision of others.

  • Page 18: Care

    AFETY NFORMATION OPERATIONAL REQUIREMENTS • For reasons of safety and proper care of the boat, always perform the • All riders must wear a Coast Guard pre-operation checks listed on page approved personal flotation device 3-4 before operating. (PFD). • Passengers must always sit in a designated seating area, place feet on the deck, and hold on to the hand grips when the boat is in motion.

  • Page 19: Hazard Information

    AFETY NFORMATION • Attach the engine shut-off cord (lan- • Maintain a safe distance from other yard) to the PFD and keep it free boats or watercraft, and also watch from the steering wheel or other for boats’ ski ropes or fishing lines. controls so that the engine stops if Obey the “Rules of the Road”...

  • Page 20: Unctions

    JET THRUST until you have a good feel for the NOZZLES maneuver. • This Yamaha Boat is water-jet pro- pelled. The pumps are directly con- nected to the engines. This means that the jet thrust will produce some INTAKE GRATE movement whenever the engines are running.

  • Page 21: Water-Skiing

    AFETY NFORMATION WATER-SKIING dex or similar fabrics like those used in bicycle shorts. You can use the boat to tow a water • A second person should be on board skier, using the tow cleat provided. as a spotter to watch the skier; in It is the boat operator’s responsibility to most states, it is required by law.

  • Page 22: Rules Of The Road

    Stand-On Vessel The vessel with the right-of-way has the duty to continue its course and speed, Your Yamaha Boat is legally considered except to avoid an immediate collision. a powerboat. Operation of the boat When you maintain your direction and...

  • Page 23: Rules When Encountering Vessels

    AFETY NFORMATION RULES WHEN ENCOUNTERING Meeting If you are meeting another power ves- VESSELS sel head on, and are close enough There are three main situations that to run the risk of collision, neither of you may encounter with other vessels you has the right-of-way! Both of you which could lead to a collision unless should alter course to avoid an acci-...

  • Page 24: Other Special Situations

    AFETY NFORMATION Narrow Channels and Bends When navigating in narrow channels, you should keep to the right when it is safe and practical to do so. If the operator of a power-driven vessel is preparing to go around a bend that may obstruct the view of other water vessels, the operator should sound a prolonged blast of four to six seconds...
  • Page 25 AFETY NFORMATION “1” “3” “5” “7” C “1” “6” N “2” LIGHTED BUOY (Port Hand) Odd number, increasing toward head “7” RB “L” of navigation. Leave to port (left) pro- ceeding RG “L” White Green Light Light “5” “4” “2” “4” “6” LIGHTED BUOY (Starboard Hand) Even number, increasing toward head “3”...

  • Page 26: Reading Buoys And Other Markers

    AFETY NFORMATION Reading Buoys and Other Markers The waters of the United States are marked for safe navigation by the lat- eral system of buoyage. Simply put, buoys and markers have an arrange- ment of shapes, colors, numbers, and lights to show which side of the buoy a boater should pass on when navigating in a particular direction.

  • Page 27: To Get More Boating Safety Information

    The Online Boating Safety Course, beaches. When travel in areas like available through the watercraft sec- these is unavoidable, operate slowly tion of the yamaha-motor.com website, and obey all laws. is a free, 50-question learning course available to the public. Upon success-...
  • Page 29 Chapter 2 FEATURES & FUNCTIONS LOCATION OF MAIN COMPONENTS ......2-1 OPERATION OF CONTROLS AND OTHER FUNCTIONS....2-5 Steering .

  • Page 31: Location Of Main Components

    & F EATURES UNCTIONS LOCATION OF MAIN COMPONENTS Main Features: Air Filter Cases Engine Compartment Vent Outlets Fuel Tank Engine Compartment Vent Inlets Battery Fuel Tank Filler Cap and Fuel Tank Vent Blower Motor Fuel Tank Compartment Drain Plug Port/Starboard Features: Jet Pumps Flush Attachments Jet Thrust Nozzles...
  • Page 32 & F EATURES UNCTIONS...
  • Page 33 & F EATURES UNCTIONS LOCATION OF MAIN COMPONENTS: Bow Lights Bow Eye Storage Compartments Bow Anchor Locker Grab Handles Cleats Courtesy Light Fuel Tank Inspection Access Hatch Throttle/Shift Levers Cooler Stern Light Storage Stern Light Socket Ski Tow Hook Jet Pump Clean-out Access Panel Pump Clean-out Interlock Switches Rear Boarding Step Accessory Pedestal Table Mounts...
  • Page 34 & F EATURES UNCTIONS LOCATION OF MAIN COMPONENTS PORT STARBOARD Control Features: Speedometer Steering Wheel Tachometer Tilt Adjustment Lever Multi-function Gauge LCD Switches and Breakers Ignition Switch Keys Control Features: Hull Drain Ladder Speedometer Pick-up Trailer Strap Eyes Steering Nozzle Deck Drain Reverse Gates Depth Finder Transponder...

  • Page 35: Operation Of Controls And Other Functions

    & F EATURES UNCTIONS OPERATION OF TILT LEVER CONTROLS AND WARNING OTHER FUNCTIONS • Never touch the tilt lever during operation, otherwise the steer- STEERING ing wheel could suddenly change position, which may lead to an accident. • Be sure the steering wheel is locked in position after adjust- ment.

  • Page 36: Engine Shut-Off Switch

    & F EATURES UNCTIONS ENGINE SHUT-OFF SWITCH WARNING • Always attach the engine shut- off cord to your personal flota- tion device (PFD) or arm or leg, BEFORE starting the engines. Failure to attach the cord could result in a runaway boat if the operator is ejected.

  • Page 37: Throttle/Shift Levers

    & F EATURES UNCTIONS OFF: Ignition circuits are switched off. The engine cannot be started but other switches will operate. (The key can be removed.) Ignition circuits are switched on. (The key cannot be removed). START: The starter motor will turn to start the engine.
  • Page 38 & F EATURES UNCTIONS This boat is equipped with “start-in- gear” protection. The engines will not start unless the levers are in the Neutral position. The shift lever controls the direction of travel. The drive line on the boat is direct drive, so jet thrust is always being pro- duced while the engines are running.

  • Page 39: Fuel Tank Filler Cap

    & F EATURES UNCTIONS FUEL TANK FILLER CAP Both tachometer faces have an LCD screen . The right (starboard) side ta- To open the fuel tank filler cap, press chometer is the “Master” gauge and the the button on the bottom of the cap to left side (port) tachometer is the “Slave”...
  • Page 40 & F EATURES UNCTIONS Pushbutton Wake Up Mode: Refers to Displayable Data Include: the state when both engines are OFF, Speed - Engine RPM - Fuel Level - Volt- the gauges are shut down, and the age - Engine Hours - Water Temp - Wa- operator pushes the “M”...
  • Page 41 4) Read Parameters: Read real time data. 8) Engine Diagnostics: Display the Yamaha engine trouble code • Press the M button to scroll down (if any). or the T button to scroll up. • To exit, press the M button or • To exit, press the M and T...
  • Page 42 & F EATURES UNCTIONS Warnings Warnings are audible and / or visual indicators of a fault condition. A warning will be displayed on the master gauge LCD. Warnings on the LCD can be acknowledged by pressing the M but- ton. Once acknowledged the message will disappear and be replaced by an “AL”...

  • Page 43: Overheat Warning System

    & F EATURES UNCTIONS ENGINE OVERHEAT WARNING SYSTEM This model is equipped with an engine overheat warning system. If the engine starts to overheat, “ENGINE OVER TEMP” will appear on the LCD display of the affected engine. The buzzer also begins to sound.

  • Page 44: Switches

    & F EATURES UNCTIONS SWITCHES Courtesy Light This switch turns on the light located in the recess on the gunwale near the BILGE helm. x1000 x1000 HORN NAV/ANC COURT BLOWER AQUA PLAY PORT STBD Blower Bilge Pump Lights Courtesy Lights This toggle switch controls the required Lights on-board lighting.
  • Page 45 To cancel the No-Wake Mode, do any it back in with your finger. If it pops of the following: out again, ask your Yamaha dealer to inspect the electrical system. • Press both No-Wake Mode buttons again.

  • Page 46: Swivel Seat Operation

    & F EATURES UNCTIONS BILGE x1000 x1000 HORN NAV/ANC COURT BLOWER AQUA PLAY PORT STBD TIP: There is also an accessory fuse at the battery (see page 4-15). STEREO SYSTEM A stereo CD player/receiver with four SWIVEL SEAT OPERATION speakers is standard. There is also a The driver’s and mid-ship passenger’s remote control key pad at the swim seats are two-way adjustable.

  • Page 47: Engine Hood

    & F EATURES UNCTIONS ENGINE HOOD STORAGE COMPARTMENTS Your boat has convenient on-board There is one hood latch located under storage areas. the front of the rear seat. To open the engine hood, lift the latch hook upward Bow Anchor Storage and lift the hood.
  • Page 48 & F EATURES UNCTIONS Glove Box Under Rear Side Seats WARNING Do not carry any flammable sub- stances in the battery compartment or any heavy or metal items that can damage the battery or cause a short circuit. Sparks or fire could result. Port-Side Console Pull up the seat cushions to access the storage compartments.

  • Page 49: Front Walk-Through

    & F EATURES UNCTIONS FRONT WALK-THROUGH Windshield If desired, the Walk-Through to the bow of the boat can be closed. Doorway Unlatch the bi-fold door from the port- side console by pulling the rubber latch. Unfold the door and guide the edge of it into the channel on the driver’s side helm console.

  • Page 50: Rear Walk-Through

    & F EATURES UNCTIONS REAR WALK-THROUGH • Do not tow a tube or other inflat- able from the tower. use the ski For easy access from the cabin area to tow hook. the stern patio area and swim platform, • Stay clear of the tow rope while lift out and stow the center rear seat pulling a wakeboard rider or skier.

  • Page 51: Collapsing The Wakeboard Tower

    & F AFETY NFORMATION EATURES UNCTIONS COLLAPSING THE WAKEBOARD Rear Tower Support TOWER Inboard Knob Outer Knob The Wakeboard Tower can be col- Upper Knob lapsed for boat storage in a building or under a canopy or carport. 3) Remove the knobs from the upper end of the tower supports, and then rotate the tower supports toward the • Accidentally dropping the upper...
  • Page 52 & F EATURES AFETY NFORMATION UNCTIONS Short Tower Storage Support 4) Install the upper knobs on both Raising sides, but leave them slightly loose. 1) While an assistant holds the upper 5) Install the inboard-side knobs to the tower section in the middle, remove bottom supports, but leave them the knobs from the top end of the slightly loose.
  • Page 53 Chapter 3 OPERATION FUEL AND OIL ..........3-1 Gasoline .

  • Page 55: Fuel And Oil

    • Avoid getting water and con- taining methanol is not recommended taminants fuel tank. by Yamaha because it can cause fuel Contaminated fuel can cause poor system damage or engine performance performance and engine damage. problems. Use only fresh gasoline that has been stored in clean containers.

  • Page 56: Engine Oil

    PERATION Additive, available from your Yamaha TIP: dealer, is formulated to remove existing • Each engine has an oil-tank system. deposits and, when used continuously, It is normal for the oil level to vary prevent new ones from forming, while depending upon whether the engine also helping to keep fuel injectors and is cold or at operating temperature.
  • Page 57 Consult a 3) The oil level should be between Yamaha dealer to have oil extracted the minimum and maximum level from the engine to avoid damage. marks. If the level is below the “L”...

  • Page 58: Pre-Operation Checks

    If a problem cannot be corrected procedures and schedules described in by the procedures provided in this this owner’s/operator’s manual. manual, have the boat inspected by a Yamaha dealer. ITEM CHECK PAGE REF. BEFORE LAUNCH OR OPERATION: STEERING Check for proper steering operation.

  • Page 59: Check Points

    PERATION TIP: Pre-operation checks should be Throttle/Shifters made each time the boat is used. These checks can be completed in a short time. It is worth the time spent to ensure safety and reliability. CHECK POINTS Steering BILGE x1000 x1000 HORN NAV/ANC COURT...

  • Page 60: Operation

    Use this port to spray the contents equipment with this boat. If you do not of a fire extinguisher into the engine have them, contact your local Yamaha compartment if a fire breaks out in the Boat dealer or fire extinguisher dealer for engine area.
  • Page 61 PERATION oxygen to the fire, increasing the risk Jet Thrust Intakes of a larger fire or an explosion. Intake Grates If you see smoke or otherwise sus- Before launching the boat, carefully pect a fire, you can look through the check the jet intakes under the boat transparent flaps of the Fire Port™...
  • Page 62 PERATION 2) Open the engine hatch, then check will sense when there is excessive water in the bilge and will automati- oil level in the engines. Add as nec- cally drain most of it through the out- essary (see page 3-2). .
  • Page 63 PERATION flushing the engine area with fresh Operate the bilge blower switch water after salt water operation. at least 4 minutes before starting the engines. Open engine hood and check to be sure no gasoline vapors are pres- ent. Check for fuel leaks or loose elec- Excessive water in the engine •...
  • Page 64 PERATION Engine shut-off switch Clip with cord First, place the boat in the water to pro- vide adequate engine cooling. Start the engine, and then remove the engine shut-off switch clip, and verify that the engine stops. Refer to pages 3-15 to 3-17, “STARTING THE ENGINES,”...
  • Page 65 PERATION Overheating and serious damage 4) Attach the snap hooks to the strap could occur. See Overheat Warning eyes. System, page 2-13, for more informa- tion. BIMINI TOP (SX210 MODEL) Raising from the fully collapsed storage position. 1) Raise the top and secure the rear support poles to the rear support pole mounts with the lock pins.
  • Page 66 See page 4-4 for Bimini top care infor- boat when it is being trailered. When mation. trailered with a Genuine Yamaha Cover, simply store the Bimini top in the fully collapsed position and install the cover. If a cover is not used, wrap an elastic...
  • Page 67 PERATION BIMINI TOP (AR210 MODEL) 3) Pull the top forward. Unclip the plas- tic clips and pull the forward sup- Raising ports toward the bow. Extend the 1) Unstrap the top. Unzip and remove supports to the long position. the storage cover, then unwrap the top.
  • Page 68 PERATION 5) Collapse the front support poles Trailering with the Bimini Top until the snap buttons click into place The top must be in the lowered position, to tighten the top fabric. covered, and strapped to the tower or removed from the tower entirely before attempting to trailer the boat.

  • Page 69: Starting The Engines

    • Before operating your boat, become familiar with all con- trols. Consult your Yamaha dealer 1) Always make sure the boat is about any control or function you launched and used in waters that do not fully understand. Failure are free from weeds and debris, to understand how the controls and at least 3 ft.
  • Page 70 PERATION WARNING Gasoline vapers can explode Operate blower for at least 4 minuutes and check engine compartments bilge for gasoline vapors before starting engines Do not start engines if there is a fuel leak or loose electrical connection 2) Attach the engine shut-off cord to 3) Put the control levers in the Neutral your PFD.

  • Page 71: Stopping The Engines

    PERATION STOPPING THE ENGINES • Never turn the ignition key to “Start” while the engine is run- ning. The starter mechanism could be damaged. • If the starter motor is engaged continuously for more than 5 seconds, the battery will become quickly discharged and it will be WARNING Gasoline vapers can explode...

  • Page 72: Break-In Procedure

    PERATION BREAK-IN PROCEDURE The engine break-in period is essential to allow the various components of the engine to wear and polish themselves to the correct operating clearances. This ensures proper performance and promotes longer component life. 1) Launch the boat and start the engines (see page 3-15).

  • Page 73: Driving Your Boat

    PERATION DRIVING YOUR BOAT Know and follow U.S. Coast Guard, state, and local laws when operating your boat. GETTING TO KNOW YOUR BOAT Select a wide area to learn in, where Operating your boat requires skills visibility is good and other boat traffic acquired through practice over a period is light.

  • Page 74: Turning The Boat

    PERATION TURNING THE BOAT input until you apply throttle again or you reach a trolling speed. WARNING At trolling speed, the boat can be • Do not pull the throttle levers turned gradually by steering wheel back to idle when trying to steer position alone using just the amount away from objects –...

  • Page 75: Boating With Passengers

    PERATION BOATING WITH PASSENGERS TURNING LEFT WARNING When passengers are on board, make sure they are seated and hold- BILGE x1000 x1000 HORN NAV/ANC ing on before you start to acceler- COURT ate. An unprepared passenger could lose balance and fall. BLOWER Your boat is designed for one operator AQUA PLAY...

  • Page 76: Boarding From A Dock Or Landing Jetty

    PERATION 2) Climb up onto the swim platform, then sit in one of the seats provided. BOARDING FROM A DOCK OR LANDING JETTY 1) Board the boat from the side. One person should board at a time by stepping into the boat. Never jump in.

  • Page 77: Stopping

    PERATION DOCKING STOPPING 1) Make sure no obstructions, boats or swimmers are close to the boat. Come to a stop before you reach the dock. 298 ft (91m) 2) Notice how wind and water currents are affecting boat movement as you attach your mooring lines and fenders.

  • Page 78: Leaving A Dock

    PERATION Wind or current pushing boat toward 2) When the stern is out a few feet, dock: release the bow mooring then steer in the direction you want the bow to move. Open the throttle slightly and begin to move away from the dock. BEACHING 1) Make sure no obstructions, boats or swimmers are near the beach.

  • Page 79: Anchoring

    PERATION ANCHORING 4) Pull on the line to be sure the anchor is holding. Also, periodically WARNING check your boat’s position against the shoreline to make sure it is not Always anchor from bow. drifting and dragging the anchor. Anchoring from the stern will make Reset if necessary.

  • Page 80: Crossing Wakes And Swells

    PERATION CROSSING WAKES AND SWELLS You will not always have flat, smooth water. There will be swells and wakes from other boats, etc. SHARP WAKES The best way to cross wakes and swells is with the least jolt to you and the boat.

  • Page 81: Post-Operation Checks

    PERATION POST-OPERATION 1) After putting the boat on the trailer, flush cooling system on each engine CHECKS to prevent the cooling system from clogging up with salt, sand, or dirt. POST-OPERATION CHECKS Refer to page 4-1 for the cooling system flushing procedure. These post-operation procedures are developed to help preserve the long- 2) Drain residual water from the exhaust...
  • Page 82 O-ring is damaged or missing. sand, from the threads before install- Reinstall all drain plugs. ing the drain plug. 6) Spray a rust inhibitor, such as Yamaha Silicone Protectant and Lubricant, on metallic parts to mini- mize corrosion. 3-28...

  • Page 83: Trailering

    PERATION TRAILERING HITCH The trailer hitch ball must match the size of the socket on the trailer hitch WARNING coupler. Hitches are divided into class- es that specify the gross trailer weight Avoid accident and injury from (GTW) and the maximum tongue improper trailering: weight.
  • Page 84 PERATION • Check wheel bearings and wheel cover, such as the genuine Yamaha lug nuts before each trip. cover available from your Yamaha dealer designed specifically for your • Check tail, brake, and turn signal boat, is highly recommended to help lights for proper operation.

  • Page 85: Backing Your Trailer

    PERATION BACKING YOUR TRAILER Each launch may have particular dif- ferences, such as ramp angle, prevail- It takes practice to back a trailer suc- ing wind, waves, and water currents. cessfully. If you are not familiar backing If possible, watch a couple of boaters up with a trailer, practice first in an open launch their boats first to notice any area away from obstacles.

  • Page 86: Loading

    PERATION LOADING 6) Follow the Post-Operation Checks on page 3-27. 1) Back the trailer down the ramp as close to 90° to the shoreline as you can. If possible, have a second person act as an observer while standing to the side of the boat. Stop when the tops of the trailer’s fenders are about 3 inches above the water- line.
  • Page 87 PERATION • Attach guidelines to the bow eye and stern tie-down cleats to control movement of the boat during lifting. • Remove all people and all cargo from the boat. Drain any excess water from the bilge using the bilge pump.
  • Page 89 Chapter 4 MAINTENANCE AND CARE STORAGE ........... 4-1 Fuel System .

  • Page 91: Storage

    Cooling system flushing is essential to Fill the fuel tank with fresh fuel, adding prevent the cooling system from clog- one ounce of Yamaha Fuel Conditioner ging up with salt, sand, or dirt. and Stabilizer or an equivalent to each gallon of fuel.

  • Page 92: Lubrication

    & C AINTENANCE LUBRICATION 4) Turn off the water supply, then drain residual water from the exhaust sys- 1) Grease the areas of the boat speci- tem by alternately pushing the throt- fied in “Grease Points” in the adjust- tle lever up to half throttle and back ment and maintenance section.

  • Page 93: Battery

    2) If the battery will be stored for a lon- and other Yamalube care products are ger period, check the specific gravity available from your local Yamaha dealer. of the fluid at least once a month 1. Remove the fuel tank compartment...
  • Page 94 Consult your be removed with Yamaclean Hull Cleaner. NOTICE: Incorrect clean- Yamaha dealer if you want to use ing can damage vinyl. See Basic a product other than Yamaclean Stain Guide on next page.
  • Page 95 & C AINTENANCE Basic Stain Guide Here are basic steps to remove common stains from boat upholstery. Consult your dealer or upholstery-cleaning professional for difficult stains. TYPE OF STAIN STEPS (rinse with clean, warm water and then dry after application) General Care/ Dirt Chewing Gum Coffee/ Tea/ Chocolate...

  • Page 96: Maintenance And Adjustment

    Be sure to turn off the engines when you perform maintenance unless otherwise specified. If you are not familiar with machine servicing, this work should be done by a Yamaha dealer or other qualified mechanic. Maintenance, replacement, or repair of the emission control devices and sys-...

  • Page 97: Periodic Inspection Chart

    Frequency of maintenance operations may be adjusted according to the operating conditions, but the following table gives general guidelines. Indicates the checkups which you may do yourself. a Indicates work to be done by your Yamaha dealer. Thereafter Page Initial...

  • Page 98: Grease Points

    GREASE POINTS To keep moving parts sliding or rotating smoothly, coat them with water resis- tant grease such as Yamaha Marine Grease, Yamaha Grease A, or an equiv- alent. Steering Cable Ball Joints and Inner Wire Grease the steering cable and shift cables ball joints at the steering noz- zles.
  • Page 99 Recommended water-resistant grease: Yamaha Marine Grease, or Yamaha Grease A The first service should be done after 10 hours or 1 month by your Yamaha dealer. Fill the bearing housing with water- resistant grease through the grease nipple. Grease capacity: 33.0~35.0 cc (1.11~1.18 oz)

  • Page 100: Fuel System Inspection

    Check the fuel system for leaks, cracks, Remove the seat cushion, then look up or malfunctions. If any problem is found, inside the compartment to see the fuel consult a Yamaha dealer. filler hose and clamp. Checking points: 1. Fuel tank leakage 2.

  • Page 101: Fuel System Cleaning

    & C AINTENANCE FUEL SYSTEM CLEANING It is recommended to have a Yamaha dealer change the engine oil and oil If the fuel system needs to be cleaned filter. However, if you choose to change or when any water is found in the fuel...

  • Page 102: Air Filter

    1) Check for smooth operation of the wheel and steering nozzles. 2) Check for proper steering adjust- ment. The nozzles should both point straight back when the steering wheel is centered. If steering is stiff or misadjusted, ask your Yamaha dealer to service it. 4-12...

  • Page 103: Controls (Throttle/Shift)

    If the controls do not operate smooth- ly or correctly, ask your authorized Yamaha Boat dealer for service. 4) Pull the shift lever back from Forward through Neutral to Reverse. The observer should check for proper movement of the shift gates.

  • Page 104: Sacrificial Anodes

    2) Clean the mounting-bolts threads, then coat them with Loctite 242, ® available from your Yamaha dealer. 3) Install the new anode. Tighten the mounting bolts to specification. Anode Bolt Torque: 50~80 kgf-cm (47~70 inch-pounds) ANODE Inspect the anodes each time the boat is removed from the water.

  • Page 105: Fuse Replacement

    & C & C AINTENANCE AINTENANCE FUSE REPLACEMENT FUSE REPLACEMENT WARNING WARNING Do not use fuses of higher amper- Do not use fuses of higher amper- that those recommended. that those recommended. Substitution of a fuse of improper Substitution of a fuse of improper rating can cause extensive electrical rating can cause extensive electrical system damage and possible fire.
  • Page 106 & C AINTENANCE Recharging WARNING Battery electrolyte is poisonous and WARNING dangerous, causing severe burns, • When charging the battery, keep it etc. It contains sulfuric acid. Avoid well away from sparks and open contact with skin, eyes or clothing. flames, as it gives off explosive gases.
  • Page 107 & C AINTENANCE Positive (+) Battery cable (Red) Negative ( –) Battery cable (Black) Accessory (+) Lead (Red/Black) Accessory (–) Lead (Black) BATTERY REMOVAL: Disconnect battery leads before removing the battery. Disconnect the negative (–) lead first. BATTERY INSTALLATION: Connect the red (+) lead and accessory red (+) lead to the positive (+) terminal of the battery.

  • Page 108: Specifications

    & C AINTENANCE AFETY NFORMATION SPECIFICATIONS MODEL ITEM UNIT SX210: LAT1100B-L VEHICLE CAPACITY Maximum people on board Number of people Maximum load capacity (persons) 1670 DIMENSIONS Length feet / inches 21' / 255.9" Beam feet / inches 8.6' /102.4" Draft inches 15"...
  • Page 109 & C AINTENANCE SPECIFICATIONS MODEL ITEM UNIT AR210: LAT1100A-L VEHICLE CAPACITY Maximum people on board Number of people Maximum load capacity (persons) 1670 DIMENSIONS Length feet / inches 21' / 255.9" Beam feet / inches 8.6' /102.4" Draft inches 15" Dry weight 2875 Height on trailer...

  • Page 111: R Ecovery

    ROUBLE ECOVERY Chapter 5 TROUBLE RECOVERY TROUBLESHOOTING ........5-1 Troubleshooting Chart.

  • Page 113: Troubleshooting

    Yamaha Boat dealer or qualified mechanic for the proper service. The Troubleshooting Chart contains: “TROUBLE,” “POSSIBLE CAUSE,” “REMEDY,” and “REFER PAGE.”...
  • Page 114 TROUBLE POSSIBLE CAUSE REMEDY PAGE Engine runs Empty • Refill as soon as possible irregularly or • Fuel Stale or • Have serviced at stalls contaminated Yamaha dealer Water or dust • Have serviced at • Fuel filter collected Yamaha dealer Fouled or defective • Have serviced at Yamaha dealer Incorrect heat range • Have serviced at • Spark plug Yamaha dealer Gap incorrect • Have serviced at...

  • Page 115: Emergency Procedures

    ROUBLE ECOVERY EMERGENCY WARNING PROCEDURES • The operator of the towing boat must keep speed to a minimum and avoid traffic or obstacles TOWING THE BOAT which could be a hazard to the driver on the boat. • The operator of the towing boat must keep speed to a minimum and avoid traffic or obstacles which could be a hazard to either...

  • Page 116: Jump Starting

    ROUBLE ECOVERY JUMP STARTING 2) Connect one end of the negative (–) jumper cable to the negative (–) WARNING terminal of the booster battery. SEVERE INJURY OR DEATH MAY 3) Connect the other end of the nega- RESULT IF YOU IGNORE ANY OF tive (–) cable to an engine hanger THE FOLLOWING: on either side of the engine oil tank.

  • Page 117: Jet Pump Clean-Out Procedure

    Yamaha Boat Dealer. 2) Lift the hatch on the rear platform. 5) To reinstall the access port cap, first clean off any sand or other foreign matter from the cap and port sur- faces.
  • Page 118 ROUBLE ECOVERY 6) Press the T-handle down firmly to lock the cap in place. Pull up force- • Be sure the caps are locked fully on the handle to be sure it is securely in place. Otherwise the locked. If a strong pull will move the cap could be forced out of the handle, it is not locked securely –...
  • Page 119 LIMITED WARRANTY ......... . 6-1 YAMAHA EXTENDED SERVICE (Y.E.S) ......6-4 BOATING TERMS .
  • Page 121 Owner’s Manual. The owner of the boat shall give notice to an authorized Yamaha Boat dealer of any and all appar- ent defects within ten (10) days of discovery and make the boat available at that time for inspection and repairs at the dealer’s place of business.
  • Page 122 SPECIFIC PARTS EXCLUDED FROM WARRANTY; Parts replaced due to normal wear or routine maintenance such as oil, spark plugs, fuel filters, impeller and liner, and anodes are not covered by warranty. Charges for transporting the boat to and from an authorized Yamaha Boat dealer are excluded from warranty coverage.
  • Page 123 2. Explain the operation, maintenance, and warranty requirements to your satisfaction at the time of sale, and upon your request at any later date. In addition, each Yamaha Boat dealer is held responsible for his setup, service and warranty repair work.
  • Page 124 5-year standard protection on available to Yamaha owners like you, and only the hull. while your Yamaha is still within the first year • Y.E.S. is designed and administered by the of the Yamaha Limited Warranty period. So...
  • Page 125 & I ONSUMER NFORMATION NDEX BOATING TERMS TERM DEFINITION The front part of the boat. Deck The “floor” or upper structure which covers the hull. Give-Way The vessel which must yield the right-of-way when two boats meet. Gunwale The meeting junction of the deck and hull; the upper edge around the boat.

  • Page 126: Float Plan

    SAMPLE FLOAT PLAN Leave a float plan with a responsible person on shore before boating. The example below can be copied and used. FLOAT PLAN VESSEL INFORMATION BOAT MAKE: Yamaha MOTOR TYPE: MODEL: LENGTH: REGISTRATION NO: DECK COLOR: HULL COLOR:...
  • Page 127 & I ONSUMER NFORMATION NDEX Caution labels..1-3, 1-4, 1-5, 1-6 Change of address (warranty) ..6-3 Access Port Caps ... . . 3-7, 5-5 Checks: Adjustment and Maintenance.
  • Page 128 & I ONSUMER NFORMATION NDEX Fuel tank capacity....3-2 Fuel tank filler cap ....2-9 Deck drain .
  • Page 129 & I ONSUMER NFORMATION NDEX Lanyard (engine shut-off Personal Flotation cord) ..1-11, 2-6, 3-10, 3-15, 5-1 Devices ..1-8, 1-10, 1-13, 3-19 Launching ..... 3-31 Post-operation checks .
  • Page 130 Switches ....2-4, 2-6, 2-14 Yamaha Extended Service (Y.E.S.) . . 6-4 Tachometers ....2-9 Throttle/shift .
  • Page 131 ©2011 YAMAHA MOTOR CORPORATION, U.S.A. Printed in U.S.A. LIT-18626-09-42...

Table of Contents