Removing A Headlamp - Ford Expedition 2014 Owner's Manual

Hide thumbs Also See for Expedition 2014:

Table of Contents

Replacing Headlamp Bulbs

WARNING: Handle a halogen headlamp bulb carefully and keep

out of children's reach. Grasp the bulb only by its plastic base

and do not touch the glass. The oil from your hand could cause the

bulb to break the next time the headlamps are operated.

1. Make sure that the headlamp control is in the off position.

2. Open the hood.

7. Insert the glass end of the new bulb into the headlamp assembly.

When the grooves in the plastic base are aligned, turn the new bulb

clockwise to install.

8. Connect the electrical connector.

9. Install the headlamp assembly and secure with two retainer bolts.

2014 Expedition (exd)

Owners Guide gf, 3rd Printing, March 2014

3. At the back of the headlamp,

remove the two headlamp assembly

retainer bolts.

4. Slide headlamp assembly forward

and off the retaining tab to expose

the back of the bulb and electrical

5. Disconnect the electrical

6. Remove the bulb by turning it

counterclockwise and then

pulling it straight out.