Creating - Ford Expedition 2014 Owner's Manual

60
• Vehicle speed minders of 45, 55 or 65 mph (75, 90 or 105 km/h).
Once you select a speed, it will be shown in the display, followed by
an audible tone when the preselected vehicle speed is exceeded.
• Audio system maximum volume of 45%. A message will be shown in
the display when you attempt to exceed the limited volume. Also, the
speed-sensitive or compensated automatic volume control will be
disabled.
• Always on setting. When this is selected, you will not be able to turn
off AdvanceTrac (if your vehicle is equipped with this feature).
CREATING A MYKEY
Use the information display to create a MyKey.
1. Insert the key you want to program into the ignition.
2. Switch the ignition on.
3. Access the main menu on the information display. Press SETUP
using the information display buttons until PRESS RESET TO
CREATE MYKEY is displayed.
4. Press and release the RESET button. HOLD RESET TO
CONFIRM MYKEY will be displayed.
5. Press and hold the RESET button for two seconds until MARK
THIS AS RESTRICTED is displayed Wait until KEY
RESTRICTED AT NEXT START is displayed.
MyKey is successfully created. Make sure you label it so you can
distinguish it from the admin keys.
You can also program configurable settings for the key(s). Refer to
Programming/Changing Configurable Settings.
Programming/Changing Configurable Settings
Use the Information display to access your configurable MyKey settings:
1. Switch the ignition on with an admin key.
2. Access the main menu on the information display controls and press
SETUP until you see RESET FOR MYKEY SETTINGS in the
display.
3. Press and release the RESET button to display the MyKey setup
menus.
4. Press the SETUP button to display the next menu and scroll through
your choices.
5. Within any of the menus, press RESET to highlight your choice. Use
the arrow buttons to make a selection.
2014 Expedition (exd)
Owners Guide gf, 3rd Printing, March 2014
USA (fus)
MyKey