RETURNING THE ENGINE TO
SERVICE
1. Perform the Daily Checks on page 29.
2. Start the engine. Allow the engine to idle, or
run without load if there is no idle position in
your application, for approximately 5 to 10
minutes while you check for:
(a) proper oil pressure.
(b) fuel, engine oil, or coolant leaks.
(c) proper operation of the indicators and / or
gauges (if equipped).
3. Avoid prolonged operation at minimum or
maximum engine speeds and loads for the
remainder of the first hour of operation.
L-N Operation Manual
LONG TERM STORAGE
85