Every 200 Hours Of Operation - Yanmar L48N Operation Manual

Industrial engines
Table of Contents

Advertisement

Figure 6
3. Lift out the inlet fuel screen (Figure 6, (3)).
4. Clean the inlet fuel screen or replace if
damaged.
5. Install the inlet fuel screen (Figure 6, (3)).
6. Replace the fuel cap (Figure 6, (1)) and hand
tighten. Overtightening the fuel cap will
damage it.
Applicable Inlet Fuel Screen Part No.
L48N, L70N and L100N
L-N Operation Manual
(1)
Perform the following maintenance every 200
(3)
hours of operation.
• Clean Air Cleaner Element
(2)
• Replace Engine Oil and Clean / Inspect
• Check Engine Speed Control
0001552A
• Drain the Fuel Tank and Replace Outlet Fuel
Clean Air Cleaner Element
114250-55100
PERIODIC MAINTENANCE

Every 200 Hours of Operation

Engine Oil Filter
Filter
A
CAUTION
FLYING OBJECT HAZARD!
• ALWAYS wear eye protection when
servicing the engine and when using
compressed air or high-pressure
water. Dust, flying debris, compressed
air, pressurized water or steam may
injure your eyes.
• Failure to comply may result in minor
or moderate injury.
CAUTION
• When the engine is operated in dusty
conditions, clean the air cleaner
element more frequently.
• NEVER operate the engine with the air
cleaner or element(s) removed. This
may cause foreign material to enter the
engine and damage it.
0000003en
0000026en
71

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

L70nL100n

Table of Contents